BFH and bumpstop mod or spacer.

Reply Subscribe

Thread Tools

Search this Thread

Jul 11, 2007 | 04:46 PM

popinsmoke

Thread Starter

Staging Lane

iTrader: (2)

Joined: Mar 2005

Posts: 79

Likes: 0

BFH and bumpstop mod or spacer.

I am trying to run a 19x10 56mm offset wheel 295/30/19 tiresize but I am hitting the bumpstop.

My car is a 02 z28 convertible is the wheel wells different on the convertibles?

Looks like I need about a 1/2 inch would you run a spacer or BFH and trim the bumpstop?

Jul 11, 2007 | 06:35 PM

Z28/2002

11 Second Club

iTrader: (27)

Joined: May 2005

Posts: 6,799

Likes: 5

From: Your girl's back door giving her the long stroke while you're at work

Quote:

Originally Posted by popinsmoke

You can take 30 minutes and grind the bump stop and use the BFH. If it works then you saved yourself some money. I can't see the wheelwells being different from coupe to convertible

Jul 12, 2007 | 05:28 PM

popinsmoke

Thread Starter

Staging Lane

iTrader: (2)

Joined: Mar 2005

Posts: 79

Likes: 0

Sh%T Sh$t Sh$t

The wheels are 79mm offset the guy on Ebay advertised them wrong looks like I am going to have to run a 1.25 inch spacer.

Jul 12, 2007 | 05:42 PM

phantomLT1

TECH Apprentice

iTrader: (2)

Joined: Mar 2007

Posts: 333

Likes: 0

From: Burleson, TX

Grind and use BFH

Just spend about 30 min fabricating grinding that bumper stop down and beat the **** out of it and you should be O.K.

Jul 12, 2007 | 06:40 PM

popinsmoke

Thread Starter

Staging Lane

iTrader: (2)

Joined: Mar 2005

Posts: 79

Likes: 0

I have BFH the hell out if the wheel well removed the bumpstop and ground the bracket flat but still needs more!&%$!@

Spacers are looking to be my only choice.