295 Tires...Will they rub?
Originally Posted by ws6pewter
just like Xsta said, it has alot to due with the side wall height. Just like I can run 315-60-18 on a 9" rim on my truck with no problems. But on my T/A I have a BFG 295-35-18 on a 10" wheel and it fits perfect. The tire does not bulge out nor does it look stretched on the rim.
As to fitment, I'm running the 295 on the AR Rebel 18 x 10 with 41mm offset in the rear and so far I have no rubbing. My car is not lowered and looks like I might have to roll the fender when I get new springs.
As to fitment, I'm running the 295 on the AR Rebel 18 x 10 with 41mm offset in the rear and so far I have no rubbing. My car is not lowered and looks like I might have to roll the fender when I get new springs.
depending on what offset you have, a 295 will just fit on an f-body. I have 295-35-18s on 18x10.5" wheels with a +50mm offset. they rub VERY little in the wheel well. However, too low of an offset will result in the tire rubbing on the fender lip. I would guess a +46mm offset would be perfect.
...and 295-35 should not be put on a 9.5" wheel.
...and 295-35 should not be put on a 9.5" wheel.
