Pics of 315's in the rear!
#63
12 Second Club
i just had my wheels off to rebalance then and noticed a very small spot on the inner wheel well looked at the tire and there was no marks so i just popped it once with a hammer on each side. not in the air my bump stop on the driver side rubs pretty bad but not the pass. side i need an adj. PHB
#64
12 Second Club
iTrader: (10)
f50nut..omg..that ride is sooo godly sweet...i love it..soon as i can figure out how to post some damn pics of my car with my gunmetal grey Zr1's i will..17x9.5 front 17x11 out back..315./35/17...somebody who posts pics really well shoot me a damn email at whiteknight91rs@Yahoo.com and i will send you pics to post..
#66
Staging Lane
iTrader: (1)
Join Date: Jul 2007
Location: Dallas TX
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
ok this is a little off subject but i noticed that on some cars one wheel sticks out more on one side than on the other, and some cars it fits more even, i have the same problem but it looks worse, on one side it looks fine but the driver side fits under the car like the stock wheel, so is there like a mod i need, its a 94z lowered 1-3/4 in and stock every thing else
#67
TECH Addict
iTrader: (24)
Yea, you need an adjustable panhard rod to center your rearend after you lower your vehicle almost 2 inches. You will probably need new adjustable LCA's as well to fix the geometry there, and not to mention still having proper pinion angle as well for your drivetrain. So much to mess with when lowering.
#68
Originally Posted by f50nut
Sure..here's the closest I've got of a side shot from that photo shoot.
Wheels are 17x9.5 front, 17x11 rear
Tires are 275/40 17 front, 315/35 17 rear
Wheels are 17x9.5 front, 17x11 rear
Tires are 275/40 17 front, 315/35 17 rear