bluebeast

iTrader: (1)

ok i have a 1994 Z28 and a 2002 Z28 and im trying to find a drag race wheel that could possibly fit both without any grinding or fitment issues....... i want that billet specialties street lite but i know they are hard to fit LS1 cars...... i would like to be able to swap the wheels out when i want to take the LS1 to the track but the LT1 car is more of a all out drag car now so it will be on it 90% of the time....... anyone have any ideas or options? and if i decide to go with the billet specialty wheel what exactly would i have to do to make it fit stock 2002 LS1 brakes and ect? cause it seems that they bolt right up to a LT1 car so i will only have problems with the LS1

tylerdj

iTrader: (31)

Prostars?

bluebeast

iTrader: (1)

do they fit LS1 cars without grinding and massaging? if so then thats my choice i guess

sixthfloorfreak

iTrader: (3)

if you don't want to grind the LS1 brakes, you're pretty much looking at Bogarts

bluebeast

iTrader: (1)

hmm, i actually dont mind grind the brakes if thats all i have to really do as much as having to hack up the while setup just to get a wheel to work..... cause if i remember its not a whole lot that needs to be grinded right? was there alot of work that needs to be done to get the street lite BS wheel to fit an LS1?

95GreenZ28

iTrader: (70)

I belive summit stars fit and they are much cheaper. I know you wont have to grind the rears but you may have to a very small amount on the fronts

bluebeast

iTrader: (1)

just for the LS1 car will have to be grinded in front possibly? they will fit right up to the LT1 i guess is what you are saying....... jake

95GreenZ28

iTrader: (70)

Yea i think they fit the lt1 cars just fine. Barely though and I am sure the ls1 will have to have some grinding. They are only 430 for all 4 shipped as well from summit

bluebeast

iTrader: (1)

cant beat that! if i got them that cheap i would probly just buy a set for just the LS1 so i dont have to take the BS wheels off the LT1

95GreenZ28

iTrader: (70)

There ya go Yea the only thing is they only make 15x8 for the rears