[PICS] 19x10/19x11 1-piece CCWs on my WS6
#24
Launching!
Join Date: Mar 2003
Location: Castaic Lake, So. Cal.
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Re: [PICS] 19x10/19x11 1-piece CCWs on my WS6
What about the offsets? It looks like they are just right. Not too many F-Bods look good in 19's, but yours looks great.
#26
Staging Lane
Join Date: Apr 2002
Location: Bay Area, CA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Re: [PICS] 19x10/19x11 1-piece CCWs on my WS6
Alex, the CCW's look as sweet as I expected. They're plain and simply stunning. Only thing that's holding me back from putting these on my '01 WS6 are the 19" rims, I'm really concerned about the lack of sidewall. Tell us again, how they ride compared to 17s/18s. Any differene when you hit large bumps, rough roads? Is it harder to launch? There must be some differences. Other question is what offsets you're running. Is there enough clearance to avoid rolling the rear lip? And last, can CCW clearcoat the rims, and if so, for how much?
#28
TECH Fanatic
Thread Starter
Join Date: Apr 2002
Location: Texas
Posts: 1,869
Likes: 0
Received 0 Likes
on
0 Posts
Re: [PICS] 19x10/19x11 1-piece CCWs on my WS6
Alex, the CCW's look as sweet as I expected. They're plain and simply stunning. Only thing that's holding me back from putting these on my '01 WS6 are the 19" rims, I'm really concerned about the lack of sidewall. Tell us again, how they ride compared to 17s/18s. Any differene when you hit large bumps, rough roads? Is it harder to launch? There must be some differences. Other question is what offsets you're running. Is there enough clearance to avoid rolling the rear lip? And last, can CCW clearcoat the rims, and if so, for how much?
My car rides really rough no matter what wheels are on it, due to my suspension setup. But after going to 19s it didnt feel any rougher. I havent tried launching them but Im sure it wouldnt be pretty. My fenders arent rolled and I have NO rubbing, even with alot of weight in the trunk. To tell you the truth, I dont even know the offsets on them. Im not a fan of clearcoats and Im not sure if they are available. What is available is this stuff called "Zoop seal" , it acts as a clearcoat, doesnt dull them and protects the finish. Makes cleaning them a LOT easier.
#29
TECH Enthusiast
iTrader: (2)
Join Date: Dec 2001
Location: That Southern Fried Space City
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Re: [PICS] 19x10/19x11 1-piece CCWs on my WS6
My friend has a supra and just recently put these wheels on. He had some 18's on before which I really liked and when he told me he was getting these, I was a real skeptic cause I didn't think anything would look as good as his last set of wheels. I'll never forget my expression when I saw these on the car for the first time. Was jaw dropping. The pictures don't do these wheels justice.
We just recently took a couple hundred mile trip from Houston to San Marcos and the car road better with these 19's than the 18's he previously had. His car is looow too. You can see pics here.
Your car looks frickin' awesome Alex!
We just recently took a couple hundred mile trip from Houston to San Marcos and the car road better with these 19's than the 18's he previously had. His car is looow too. You can see pics here.
Your car looks frickin' awesome Alex!
#31
TECH Enthusiast
Join Date: Feb 2003
Location: Michigan (Holland/Grand Rapids)
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Re: [PICS] 19x10/19x11 1-piece CCWs on my WS6
Alex, those wheels are SWEET! WAY better than a ZO6 wheel, they really set your car appart from the others out there!
I have always liked the Boyd Blaster wheel but the ones I have seen on an F-Body look like chit as they don't have that deep dish, fat lip look like on their website. With the curve of the CCW spokes you can have that sweet split spoke but also the deep dish fat lip that looks so good on our cars.
Nice choice!
Greg
I have always liked the Boyd Blaster wheel but the ones I have seen on an F-Body look like chit as they don't have that deep dish, fat lip look like on their website. With the curve of the CCW spokes you can have that sweet split spoke but also the deep dish fat lip that looks so good on our cars.
Nice choice!
Greg
#32
TECH Fanatic
Thread Starter
Join Date: Apr 2002
Location: Texas
Posts: 1,869
Likes: 0
Received 0 Likes
on
0 Posts
Re: [PICS] 19x10/19x11 1-piece CCWs on my WS6
Bobby- Seans car does look great, we've been meaning to do a photoshoot with both the cars.
Levi- Thats correct.
Greg- Thanks! As you may or may not know, I ALMOST went with the Aeros
Levi- Thats correct.
Greg- Thanks! As you may or may not know, I ALMOST went with the Aeros
#33
TECH Addict
Join Date: Jan 2002
Location: Magee MS
Posts: 2,950
Likes: 0
Received 0 Likes
on
0 Posts
Re: [PICS] 19x10/19x11 1-piece CCWs on my WS6
I do beleive those go in the "wheel hall-o-fame on my computer!!!!!!!
I think a set of those will be setting on my ride in the future..... hopefully near...... but I dunno if I should hold my breath... he he he
Josh S.
I think a set of those will be setting on my ride in the future..... hopefully near...... but I dunno if I should hold my breath... he he he
Josh S.
#36
TECH Regular
iTrader: (3)
Join Date: Mar 2003
Location: LAFAYETTE, INDIANA
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
Re: [PICS] 19x10/19x11 1-piece CCWs on my WS6
Greg- Thanks! As you may or may not know, I ALMOST went with the Aeros
definetly be glad you didn't go with the IForged "aeros", you probably wouldn't have gotten them till next summer!
#37
Launching!
Join Date: Aug 2003
Location: Sheridan, AR
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Re: [PICS] 19x10/19x11 1-piece CCWs on my WS6
Love the wheels man!! Best ones I think i have seen. Does anyone know of a wheel that is similar but in chrome...with a smaller price tag!!