???REMOVE R.A.P. (retained accessory power).....
may splicing the R.A.P. wire to another wire to get rid of R.A.P?
i dont need R.A.P. because i removed my power door locks so the sensor in the door latch just keeps the dome light on for ten minutes before the dome light shuts off
As far as the courtesy lights go, you must have cut too many or the wrong wires when removing the power locks. You need to retain the wiring to the door lock that supports the door open switch. Otherwise, the BCM will never know when a door is opened in order to control the courtesy lights.
Trending Topics
You could convert the RAP circuit to work like an ordinary ignition controlled circuit by just grounding the gray/black wire in the blue connector at the BCM. This will make the BCM think the driver's door is open all the time so it disables RAP and only provides power when the ignition is on.
The Best V8 Stories One Small Block at Time






