Finished A4 to M6 swap

Reply Subscribe

Thread Tools

Search this Thread

Apr 9, 2009 | 09:42 PM

bene

Thread Starter

Trunion King

iTrader: (16)

Joined: May 2006

Posts: 4,394

Likes: 3

From: Texan in Colorado

Finished A4 to M6 swap

Now my cruise control doesn't work? Help?

Apr 9, 2009 | 10:34 PM

Black02SLPSS

TECH Fanatic

iTrader: (5)

Joined: Nov 2006

Posts: 1,485

Likes: 1

From: Owasso, Ok

Ya mine doesnt work either. If you want it to work then your gonna hafta tap into the pcm and run a wire somewhere, not sure where tho

Apr 10, 2009 | 07:23 AM

bene

Thread Starter

Trunion King

iTrader: (16)

Joined: May 2006

Posts: 4,394

Likes: 3

From: Texan in Colorado

Harness was modified for M6.

Apr 10, 2009 | 07:31 AM

JayBirdWs6

TECH Resident

iTrader: (1)

Joined: Mar 2004

Posts: 802

Likes: 0

From: Maryland

mine never worked after the install about 2-3 yrs ago either. I wasnt to worried about it

Apr 10, 2009 | 02:17 PM

Engine_HP

TECH Fanatic

iTrader: (1)

Joined: Jun 2008

Posts: 1,752

Likes: 9

From: Middle East.

mine did the same thing but im still with the a4`s harness with minor upgrades.

u might need to wire the clutch pedal position switch

start by reading from here: https://ls1tech.com/forums/manual-tr...uested-25.html

Apr 11, 2009 | 04:53 PM

Mike454SS

TECH Addict

iTrader: (4)

Joined: Oct 2004

Posts: 2,142

Likes: 9

From: South Windsor, CT

I believe you need to wire the park/neutral switch from the auto shifter to the clutch pedal switch on the top, not the starter switch on the bottom...that way the cruise knows when you step on the clutch pedal and lets the throttle go before the engine winds up revving free...right now the cruise module is probably looking for that and seeing that it's in park/neutral, and not turning on in the first place.

I'd go nuts without the cruise, so if I can do anything to help I will...let me know if you need me to actually look at how the clutch pedal is wired in my car.