Speaker install
Thread Starter
TECH Fanatic
iTrader: (9)
Joined: Nov 2006
Posts: 1,985
Likes: 0
From: Fresno, California
Speaker install Hey all, I just got the Kee Audio replacement package and I was wondering if there was an install write up or thread along those lines. Im pretty clueless about this stuff so any help is appreciated. Thanks!
its pretty straight forward, take off the door panels, unscrew old speaker, hook up new speaker and screw it in. For the sail panels you just have to take off the speaker cover. Just gotta make sure the wiring is correct and your good to go.
Thread Starter
TECH Fanatic
iTrader: (9)
Joined: Nov 2006
Posts: 1,985
Likes: 0
From: Fresno, California
How do you connect the speakers? Also my door speakers came with a plastic box with alot of wiring/technical **** in it that has connections on it labeled input +/-, woofer +/-, and tweeter +/-. How does that fit in? and how to tell if a wire is positive o negative?
Im really talking about breaking it down retard style. I really don't want to screw this up!
Im really talking about breaking it down retard style. I really don't want to screw this up!
Thread Starter
TECH Fanatic
iTrader: (9)
Joined: Nov 2006
Posts: 1,985
Likes: 0
From: Fresno, California
Should be all the info you need right here. 
https://ls1tech.com/forums/2766421-post10.html
https://ls1tech.com/forums/stereo-el...come-here.html
https://ls1tech.com/forums/2766421-post10.html
https://ls1tech.com/forums/stereo-el...come-here.html
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
To get the best sound quality from your new speakers wire your factory speaker wires to the cdt crossovers first, then to your new speakers.
FYI, if you don't use the CDT crossovers let me know, just Don't tose them in the trash.
On The Tree
Joined: Jan 2007
Posts: 136
Likes: 0
From: Atlanta, Ga
If you are using the stock monsoon amp, you will not use the crossovers that the Cdt's came with. The monsoon amp has a crossover built into it. If you decide to get rid of the monsoon and go to an aftermarket amp, then you will need the CDT crossovers to seperate the front channels for the tweeter and midrange.
