Im guessing its the window motor? 
DIY Pass Window Fix Step by Step (PICS missing)
Very true. If you put everything back together and the window moves at all, it means the wiring is correct. You can always double check the voltage at the motor, but what you're describing sounds like a worn out motor to me.
Teching In
Joined: Feb 2010
Posts: 24
Likes: 0
Alright so i broke the old regulator as i was taking it out so i ordered a new regulator with motor. Installed it in and now the window has problems going all the way up i have to assist it. It is not the motor because sometimes i get around 1 1/2 inches way from the window being all the way up and after the motor is stoped it slowly creeps up a half an inch or so. Then i have to stick a screw driver under the window(door panel is still off) and pry it up. Any ideas
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Joined: Nov 2003
Posts: 11,329
Likes: 346
From: Jacksonville, FL (originally from Toronto Canada)
The OP is still active on this forum so maybe you could PM him. The pictures could be added as attachments or we can set up a place to host them if necessary.
For the most part, the instructions are very complete and can be used to complete the mod even without photos.
For the most part, the instructions are very complete and can be used to complete the mod even without photos.
So let's give this a try..
Relay#1
86- light blue
85- ground
87- other side of light blue
30- wire from battery
Relay#2
86- light brown
85- ground (piggybacked to relay #1 pin 85)
87- other side of light brown
30- piggybacked off relay #1 pin 30
Is that not right?
Relay#1
86- light blue
85- ground
87- other side of light blue
30- wire from battery
Relay#2
86- light brown
85- ground (piggybacked to relay #1 pin 85)
87- other side of light brown
30- piggybacked off relay #1 pin 30
Is that not right?
Is my wiring pin-out not look correct? All your essentially doing is running power from the battery to the relays. So they have 14v, and just put relay inline of the switching wires (lt brown, lt blue)?
Joined: Nov 2003
Posts: 11,329
Likes: 346
From: Jacksonville, FL (originally from Toronto Canada)
No luck finding pics after digging through multiple backups of my old system.
However, I did a quick google search and found this link on another site that has a diagram of how to wire the passenger window but I think the driver side was wired slightly different and has different wire colors as I remember.
http://6litereaterdesigns.com/forum/...hp?topic=710.0
However, I did a quick google search and found this link on another site that has a diagram of how to wire the passenger window but I think the driver side was wired slightly different and has different wire colors as I remember.
http://6litereaterdesigns.com/forum/...hp?topic=710.0
Joined: Nov 2003
Posts: 11,329
Likes: 346
From: Jacksonville, FL (originally from Toronto Canada)
What's weird about it? The window motor reverses direction by reversing polarity so the SPDT relays merely switch between power and ground based on window direction.
