Amp Question
Thread Starter
TECH Resident
iTrader: (60)
Joined: Dec 2006
Posts: 849
Likes: 0
From: Jacksonville, Florida
Amp Question How would this amp work with 2 of these 8' subs that I will provide the link for. Would it be to much not enough? Also anyone ever use power acoustik? I have have never used them before. Ya'lls thought will be helpful.
Amp:
http://www.crutchfield.com/S-g9nwwaS...k-TS960-4.html
Subs I will have 2 of these:
http://cgi.ebay.com/RE-AUDIO-US-AMPS...3A1%7C294%3A50
Amp:
http://www.crutchfield.com/S-g9nwwaS...k-TS960-4.html
Subs I will have 2 of these:
http://cgi.ebay.com/RE-AUDIO-US-AMPS...3A1%7C294%3A50
TECH Resident
iTrader: (3)
Joined: Dec 2002
Posts: 863
Likes: 0
From: Showing Italians the power of LS1
You could use that amp with those speakers, but to power more than a pair of subs. You could wire each of those subwoofers voice coils in series so they are essentially 8 ohm subs, then wire both the subs in parallel so they present a 4 ohm load to the amp on channels 3-4 (bridged). Then use channels 1 & 2 to power your front speakers (front doors). Remember, If you will be using the factory deck you will need a line output converter as well as some RCA cables to connect to the signal input to the amp. Also, don't forget to buy a decent 8 gauge power wiring kit for the amp as well. You might want to check out Kee audio (sponsor) to see what they can do for you as well. --->
