wise690

Thanks. Re-soldered my BCM after I finished this. That was a lot of fun...

Now if I can find the time to I'm going to start working on building driver and passenger side stealth boxes for the hatch as well as an amp rack.

benz510

Nice Job. How hard was it to fabricate the brackets on the side of the Radio and what suggestions do u have as far as making those? Any pointers would help. Thanks!

DaRReLL

iTrader: (4)

I plan on sending my bezel to emblempros to have it hydrocoated..

look at these posts

https://ls1tech.com/forums/14821806-post550.html

https://ls1tech.com/forums/14822245-post551.html

looks real sweet....

wise690

The brackets are just cheap 90 degree angle pieces I bought from a hardware store. I roughed the back side of them up with a grinder and roughed up the outside of the radio mount and used JB weld to bond both together. Still holding strong today. I'm at work now, but I think I have some better pictures at home I will upload in a few hours.

That will look awesome! Post pics up when you get it done.

DOUBLEDMODS

iTrader: (3)

that bezel was made for a flip out screen say a 7180
when we do not know radio it gets made for a full screen to eliminate problems. When we had orders come in from our friends at 6le we did not know radio to make bezel for. So it was made to allow for fitment of either style radios.

This is why we liek to know what your putting in for radio and can also package the radio with the bezels for a better deal
Dennis