Power Window Modulator?
Thread Starter
Teching In
Joined: Oct 2009
Posts: 27
Likes: 0
From: Silsbee Tx
Power Window Modulator? Super sorry if i this has already been posted, but i didn't find anything.
would anyone happen to know where the window modulator is and how i can get to it.
All i know is that i've been told its in the dash somewhere.
My driver side window does not work, and i know its not the motor, switchs, or fuses, so ive been told that in rare occasions some modulator in the dash somewhere will go out resulting in the window to not work.
please correct me if im wrong on any of this.
any suggestions would help, thanks
-adam
would anyone happen to know where the window modulator is and how i can get to it.
All i know is that i've been told its in the dash somewhere.
My driver side window does not work, and i know its not the motor, switchs, or fuses, so ive been told that in rare occasions some modulator in the dash somewhere will go out resulting in the window to not work.
please correct me if im wrong on any of this.
any suggestions would help, thanks
-adam
Thread Starter
Teching In
Joined: Oct 2009
Posts: 27
Likes: 0
From: Silsbee Tx
but if i remember correctly it was checked. Just dont remember the results
i just remember i was told after checking everything that it most likely is the modulator,
and thatll only cost me like $45 at a junk yard.
from the driver's side its about 6 inches to the right of the gas pedal. its fitted in a little pocket on the firewall. you'll have to pull the little knee bolster/ footwell closeout to pull it out, but if you are small, you may be able to see it without pulling the closeout.. i'm 6'3" and 320 lbs, and i can get to it and have it out in less than 10 minutes. its easy. not a cheap piece, but its easy.
Thread Starter
Teching In
Joined: Oct 2009
Posts: 27
Likes: 0
From: Silsbee Tx
from the driver's side its about 6 inches to the right of the gas pedal. its fitted in a little pocket on the firewall. you'll have to pull the little knee bolster/ footwell closeout to pull it out, but if you are small, you may be able to see it without pulling the closeout.. i'm 6'3" and 320 lbs, and i can get to it and have it out in less than 10 minutes. its easy. not a cheap piece, but its easy.
98% chance your motor is bad. Sometimes they just stop working and crap out totally. How do you know its not?
If you hear a click from the module when you move the switch - that's an indication that its probably fine and your motor is a dud.
If you hear a click from the module when you move the switch - that's an indication that its probably fine and your motor is a dud.
Trending Topics
Thread Starter
Teching In
Joined: Oct 2009
Posts: 27
Likes: 0
From: Silsbee Tx
Theres no clicking, no nothing.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
