Old School VS. New School Power
#41
No i was just trying to get to you Guess its a draw Back on to the thread... I'm thinking of ditching the subthump box and going to twin stealth boxes. Any recommended 10's that would work well with my thunder 2160's?
#43
Recently i've heard a few setups that just sounded so much more crisp. (If that makes sense) And i'd like to have the normal T-top storage back. The t-top box works but its kind of a pain. Just didnt know if my amps would be enough to push some of the latest 10's.
#45
What about the Cyclone sub. The only sub to reproduce frequencies that low. Bad side was it needed a set of conventional subs to pick up the higher notes.
The excursion capabilities of these was terrible. I only sold a few of them but couldn't tell you how many were replaced under warranty.
And were they expensive, DAMN!
The excursion capabilities of these was terrible. I only sold a few of them but couldn't tell you how many were replaced under warranty.
And were they expensive, DAMN!
#46
Ok I have the driver side stealthbox with a JL 10W3V3 and a passenger subthump....too my knowledge JL Audio doesn't have a passenger stealth box....do they??? Would love to see this
#47
#48
I have been running my black Orion BEAST since new. Just recently one of the channels went out. I have never had a newer amp last more than a couple of years without some kind of an issue. I am actually getting ready to send of the Orion to get the channel fixed but don't know where to send it.
#49
#51
I'll chime in for the Rockford Power 500a2 and 800a2 that were made in the late 90's and early 2000's. You can still find them for sale on ebay pretty regularly.
I have a 500a2 that has been in several installs and is still going strong (bought new back around 99' or 00'). That sucker benched at 730W at around 13V if memory serves. Powered my 3 JL 12W6's at 8 ohm's very nicely! Now its on a 15" Kicker L7 that I got for free.
I have a 500a2 that has been in several installs and is still going strong (bought new back around 99' or 00'). That sucker benched at 730W at around 13V if memory serves. Powered my 3 JL 12W6's at 8 ohm's very nicely! Now its on a 15" Kicker L7 that I got for free.
#52
I started on my install tonight. Here is some pic of what's going in.
Attachment 249416
Attachment 249417
Attachment 249418
Attachment 249419
I also have these speakers on order-CDT CL-E6Cf
and CL-6. This was done on a budget.
Attachment 249416
Attachment 249417
Attachment 249418
Attachment 249419
I also have these speakers on order-CDT CL-E6Cf
and CL-6. This was done on a budget.
Last edited by 98z8uup; 03-01-2014 at 10:11 PM.
#53
I started on my install tonight. Here is some pic of what's going in.
Attachment 249416
Attachment 249417
Attachment 249418
Attachment 249419
I also have these speakers on order-CDT CL-E6Cf
and CL-6. This was done on a budget.
Attachment 249416
Attachment 249417
Attachment 249418
Attachment 249419
I also have these speakers on order-CDT CL-E6Cf
and CL-6. This was done on a budget.
#54
#55
Just a few more pic of my install-still waiting on speakers to come in.
[ATTACH]250674[/ATTACH
Attachment 250675
Attachment 250676
[ATTACH]250674[/ATTACH
Attachment 250675
Attachment 250676
Last edited by 98z8uup; 12-17-2011 at 06:42 PM.
#56
Finally got finish with the install..
Poor sub-can't take the power of the punch75, now I need to dynamat the truck area of
the car. Here is a few more pics..
Attachment 251937
Attachment 251938
Attachment 251939
Still need to do a little work with the radio bezel, and mount the ipod.
Poor sub-can't take the power of the punch75, now I need to dynamat the truck area of
the car. Here is a few more pics..
Attachment 251937
Attachment 251938
Attachment 251939
Still need to do a little work with the radio bezel, and mount the ipod.
Last edited by 98z8uup; 12-17-2011 at 06:42 PM.