Clarion vx401 install help
Thread Starter
On The Tree
Joined: Jun 2011
Posts: 122
Likes: 0
From: Origionally-Winnipeg Manitoba, Currently-Fort McMurray Alberta
Clarion vx401 install help Installing clarion vx401 into my 2008 impala, have the gmos-lan-02 interface.
I have it all wired-from what i can tell-correctly.. but when i plug the deck in, and start turning the volume up the speakers cut out front to back-tweaters first, then front door speakers, then 6x9's in rear..
This is my first deck install since the good old days when it was just a few wires to splice together..
any suggestions? will give as much info as possible if need be.
I have it all wired-from what i can tell-correctly.. but when i plug the deck in, and start turning the volume up the speakers cut out front to back-tweaters first, then front door speakers, then 6x9's in rear..
This is my first deck install since the good old days when it was just a few wires to splice together..
any suggestions? will give as much info as possible if need be.
