Issue with Headlight Motor
Thread Starter
Teching In
Joined: Jun 2017
Posts: 6
Likes: 0
Issue with Headlight Motor Hello, picked up a WS6 recently and working out a few bugs; one of them being a headlight motor that I'm having an issue with.
Cog in original motor was trashed so I purchased a CarDone unit with the serviceable cover. I hooked up the unit and the motor does not turn when I flip on the headlights. The high and low output wiring from the CarDone unit does give out over 11 volts on the multimeter so there's juice flowing. I disconnected the other motor and plugged in the new motor and it turns when I flip on the headlights. I'm just trying to figure out why it doesn't turn on the side I'm trying to replace?
Any help is much appreciated.
- LR
Cog in original motor was trashed so I purchased a CarDone unit with the serviceable cover. I hooked up the unit and the motor does not turn when I flip on the headlights. The high and low output wiring from the CarDone unit does give out over 11 volts on the multimeter so there's juice flowing. I disconnected the other motor and plugged in the new motor and it turns when I flip on the headlights. I'm just trying to figure out why it doesn't turn on the side I'm trying to replace?
Any help is much appreciated.
- LR
Joined: Nov 2003
Posts: 11,334
Likes: 347
From: Jacksonville, FL (originally from Toronto Canada)
Have you checked the fuse? There are separate left and right headlight door fuses in junction block #1 under the hood. They are 15A mini fuses labeled LH HDLP DR and RH HDLP DR and are completely independent of the low beam and high beam headlight circuits.
