Bypassing the brake wire on the TV install
I have the Clarion VRX935VD, and I don't wanna hook up the brake wire so that the parking brake has to be on for the screen to play DVD's. So is there anyway I can bypass this, the manual says the DVD screen wont work if it's not hooked up, BUT I would think I Could hook it up to anything that has a signal 24-7 right to allow me to play it, since the parking break lamp only sends a signal when it's set....Right? For those that may have the Clarion is the GRASS GREEN or lighter green wire on the back. Also has anyone ever hooked up their Phone Mute wire before?
thanks
Trending Topics
The Best V8 Stories One Small Block at Time
Correct it's uses an accelerameter.
However, there is a bypass to the new AVIC's. There is a sticker on the brain you can remove and jumper the connectors to put it in "service mode."
On some of the other model's it's via grounding a spare wire not used on the harness. You just have to get a wire plugged into the spare hole in teh harness, ground it, and away you go breaking the law. Last edited by unredeemed; Aug 23, 2005 at 02:35 AM.
i screwed up and missed the timeframe for the pioneer class on navi. so i was told by another dealer that it used gps.
i screwed up and missed the timeframe for the pioneer class on navi. so i was told by another dealer that it used gps.
Don't forget there is an RPM signal wire that is hooked up to help aid in the navigation function. I wouldn't be surprised if that has dual duties to see whether the car is on or not.






