Problem with components
Problem with components I had a shop install some component speakers in my doors but for some reason it sounds worse than the stock speakers did. I have an aftermarket HU and I know they used the stock wiring, so it still goes through the stock amp.
I know this has a filter, would that cause the speakers to sound quieter?
I was going to try and run new wires directly from the HU, but was not sure how to do that.
the car is a 99 t/a also
I know this has a filter, would that cause the speakers to sound quieter?
I was going to try and run new wires directly from the HU, but was not sure how to do that.
the car is a 99 t/a also
Originally Posted by peterlawl84
I had a shop install some component speakers in my doors but for some reason it sounds worse than the stock speakers did. I have an aftermarket HU and I know they used the stock wiring, so it still goes through the stock amp.
I know this has a filter, would that cause the speakers to sound quieter?
I was going to try and run new wires directly from the HU, but was not sure how to do that.
the car is a 99 t/a also
I know this has a filter, would that cause the speakers to sound quieter?
I was going to try and run new wires directly from the HU, but was not sure how to do that.
the car is a 99 t/a also
TECH Enthusiast
Joined: Sep 2005
Posts: 717
Likes: 0
From: Georgetown, DE
Assuming the rest of your equipment is the stock Monsoon sound system, and you only swapped the door speakers:
There is likely nothing wrong with your system, you just didn't choose the best speakers. The Monsoon system does not put out alot of power. If the speakers are quieter than the stock speakers, it is simply because they are less sensitive and require more power.
There is likely nothing wrong with your system, you just didn't choose the best speakers. The Monsoon system does not put out alot of power. If the speakers are quieter than the stock speakers, it is simply because they are less sensitive and require more power.
i have one amp running 2 10in subs right now and was just trying to run the components off the HU first to see if that had enough power. i had the small speakers in the hatch replaced with 5x7s and they sound a lot better and louder, so thats why i couldnt figure out whats going on with these speakers in the door
eclipse 6 1/2 in the door and then 2 way 5 x7 in the hatch.
ok sorry this is a stupid question but i dont know much about stereos...how do i run new wires from the HU to the speakers...like where do i connect the wires into the back of the HU. into the extra RCA outputs or what?
thanks
ok sorry this is a stupid question but i dont know much about stereos...how do i run new wires from the HU to the speakers...like where do i connect the wires into the back of the HU. into the extra RCA outputs or what?
thanks
Trending Topics
i know that they will sound better with another amp installed, but i really only want to have one amp in the car due to space and cost. a friend of mine who has a blazer installed the same components and run them off his HU and they sound decent, alot louder than mine are right now, so im trying to figure out whats wrong with mine and see if running new wires and bypassing the monsoon amp solves the problem.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo TECH Enthusiast
Joined: Sep 2005
Posts: 717
Likes: 0
From: Georgetown, DE
Since you mentioned RCA jacks, I'll assume you have an aftermarket head unit. Since the factory head does not have them.
To run new wires to your door speakers you'd hook them up to the hi-lvl speaker outputs, not the RCA's. The RCA jacks or low-level outputs are used only to feed the audio signal to some other equipment, like a signal processor, equalizer, or more commonly to an amplifier.
To run new wires to your door speakers you'd hook them up to the hi-lvl speaker outputs, not the RCA's. The RCA jacks or low-level outputs are used only to feed the audio signal to some other equipment, like a signal processor, equalizer, or more commonly to an amplifier.
