need help figuring out what i wired wrong
need help figuring out what i wired wrong i recently put new motor mounts in my car. ever since, there has been a current draw between 250ma and 500 ma. My multimeter only goes up to 250ma and the fuse in it is for 500ma so i figure the current draw is somewhere in that range.
this is with the car sitting with the doors shut, all factory electronics off, and all aftermarket electronics completely disconnected. i'm pretty sure i plugged everything back in properly (weatherpack connector to alternator, large screw down cable to alternator, large screw down cable to starter, small screw down cable to starter, weatherpack connector to AC compressor)...don't know if there is another one in there that i somehow missed.
my old battery just couldn't take it anymore and i don't want the new one to get fried because of this. let me know if you guys have any good ideas
this is with the car sitting with the doors shut, all factory electronics off, and all aftermarket electronics completely disconnected. i'm pretty sure i plugged everything back in properly (weatherpack connector to alternator, large screw down cable to alternator, large screw down cable to starter, small screw down cable to starter, weatherpack connector to AC compressor)...don't know if there is another one in there that i somehow missed.
my old battery just couldn't take it anymore and i don't want the new one to get fried because of this. let me know if you guys have any good ideas
