need help installing air/fuel gauge
the instructions are really accurate and easy to follow. # 46 pin on your pcm should be solid purple for the 02 sensor.. i ran a wire through the grommet in the firewall on the passenger side then spliced it in..... find a good solid ground where ever your mounting it and a switched power source
Trending Topics
Thread Starter
TECH Addict
iTrader: (8)
Joined: Aug 2005
Posts: 2,541
Likes: 2
From: Spartanburg, SC
aight neither 46 pin is solid purple. the one on the botto connector is brown w/ white stripe and the one on the top connector is solid grey. i tapped into both of them and neither one gave me a reading on the gauge....is it in another pin on the 2000 models?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
just looked it up,pin 65 or 66 on the blue connector for a 2000 heres the link to the pcm pins
http://www.ls2.com/boggs/torques/00pinpcm.htm
http://www.ls2.com/boggs/torques/00pinpcm.htm
