Combo efficiency help
Thread Starter
12 Second Club
Joined: Apr 2003
Posts: 351
Likes: 0
From: Austin, Texas
Combo efficiency help I haven't been into car stereos in years. I forgot about running subs in series and parallel and all that junk. I was wondering if this combo could work efficiently:
2 - Orion HP 10D2's
http://www.orioncaraudio.com/subwoof...b_p_series.asp
1 - Phoenix Gold RSD600.1
http://www.phoenixgold.com/2004/rsdamps.html
Thanks in advance!
2 - Orion HP 10D2's
http://www.orioncaraudio.com/subwoof...b_p_series.asp
1 - Phoenix Gold RSD600.1
http://www.phoenixgold.com/2004/rsdamps.html
Thanks in advance!
Last edited by WS.666; May 29, 2006 at 08:40 AM.
TECH Senior Member
Joined: Apr 2004
Posts: 6,157
Likes: 1
From: Texas
Originally Posted by WS.666
I haven't been into car stereos in years. I forgot about running subs in series and parallel and all that junk. I was wondering if this combo could work efficiently:
2 - Orion HP 10D2's
http://www.orioncaraudio.com/subwoo...ub_p_series.asp
1 - Phoenix Gold RSD600.1
http://www.phoenixgold.com/2004/rsdamps.html
Thanks in advance!
2 - Orion HP 10D2's
http://www.orioncaraudio.com/subwoo...ub_p_series.asp
1 - Phoenix Gold RSD600.1
http://www.phoenixgold.com/2004/rsdamps.html
Thanks in advance!
Looks like that would make a great combo but youll need the single voice coils to make a 2ohm load on that mono block amp. Wire the 2 single voice coil speakers in parallel
Thread Starter
12 Second Club
Joined: Apr 2003
Posts: 351
Likes: 0
From: Austin, Texas
A friend showed me this link today.
http://www.rockfordfosgate.com/rftec...l+-+2+ohms+x+2
If I wired them up this way would it work?
http://www.rockfordfosgate.com/rftec...l+-+2+ohms+x+2
If I wired them up this way would it work?
Last edited by WS.666; May 29, 2006 at 08:48 AM.
