lol that sounds like alot, but oh well.. gotta do wut ya gotta do for better sound, right?
how much sq ft. is a camaro?
Thread Starter
TECH Apprentice
Joined: Jan 2006
Posts: 381
Likes: 0
From: Hampton, VA
how much sq ft. is a camaro? 4th gen - 02 z28 - how much sq. footage wuld i need to sound deaden the whole car? thought about gettin second skin 80sq. ft. of sheets to lay down, but i also wuld like to get more if i need more - i dont wanna tear my car apart one day an lay everything down then have to wait for more sheets to come in.
I know that I might get flamed for it, but you sound like youre doing what I am working on.
I am 3x bulk packs of dynamat xtreme (36ft2 per pack) in and I need 1 more bulk pack to finish the job.
I have not touched the doors, the area next to the rear seats, or the firewall yet.
I have, however, matted everything else. I have enough done such that I have all of the interior back in the car except for the plastic panels by the back seats.
So, using 4 bulk packs as a guesstimate, that puts it at 144 square feet (give or take).
Thats a gross amount of matting (har har...)
I am 3x bulk packs of dynamat xtreme (36ft2 per pack) in and I need 1 more bulk pack to finish the job.
I have not touched the doors, the area next to the rear seats, or the firewall yet.
I have, however, matted everything else. I have enough done such that I have all of the interior back in the car except for the plastic panels by the back seats.
So, using 4 bulk packs as a guesstimate, that puts it at 144 square feet (give or take).
Thats a gross amount of matting (har har...)
Trending Topics
honestly, just get some name brand DYnamat extreme for your car. youll thank yourself later. There are TOO many cheap immitations around that dont work nearly as well as they say they do. ive used 200 sq (100 on my car)ft of fatmat xtreme and could not be more disapointed. Dynamat extreme forms extremeley well around curves, is slightly thicker, and needs minimal prepping for the best adhesion. Fatmat starts falling off after 1 week of hot weather.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by umrjmac
I know that I might get flamed for it, but you sound like youre doing what I am working on.
I am 3x bulk packs of dynamat xtreme (36ft2 per pack) in and I need 1 more bulk pack to finish the job.
I have not touched the doors, the area next to the rear seats, or the firewall yet.
I have, however, matted everything else. I have enough done such that I have all of the interior back in the car except for the plastic panels by the back seats.
So, using 4 bulk packs as a guesstimate, that puts it at 144 square feet (give or take).
Thats a gross amount of matting (har har...)
I am 3x bulk packs of dynamat xtreme (36ft2 per pack) in and I need 1 more bulk pack to finish the job.
I have not touched the doors, the area next to the rear seats, or the firewall yet.
I have, however, matted everything else. I have enough done such that I have all of the interior back in the car except for the plastic panels by the back seats.
So, using 4 bulk packs as a guesstimate, that puts it at 144 square feet (give or take).
Thats a gross amount of matting (har har...)
