Installed Infinity's In Sail Panel!
Thread Starter
Administrator
Joined: Nov 2001
Posts: 29,404
Likes: 0
From: Houston, TX
Installed Infinity's In Sail Panel! I've been thinking about replacing my sail speaker with another stocker....again. But I decided to go ahead and get the Infinity Kappa 62.7i (2ohm) speakers for the sail panel.
The plastic adapter is a little thick and I also had to trim it, but all in all they sounded great. As I replaced the blown one I tested it and the Infinity sounded a little bit better then the stock one I had yet to replace on the other side. They're both in now and it sounds pretty good.
I have one extra door speaker, but when one of them goes I think that I'll skip replacing it with another stocker and slap these same speakers in the doors as well. And maybe run a wire off of that 4ohm tweater wire to the tweater in the sail speakers.
Sometimes it can be hard to find the wire colors, so I post them again for you guys:
Sail panel speaker wire colors
Driver side: Dark blue w/ white stripe = speaker (+)
Light green w/ black stripe = Speaker (-)
Passenger: Dark green = speaker (+)
Light blue w/ black stripe = speaker (-)
Peace,
Craig.
The plastic adapter is a little thick and I also had to trim it, but all in all they sounded great. As I replaced the blown one I tested it and the Infinity sounded a little bit better then the stock one I had yet to replace on the other side. They're both in now and it sounds pretty good.
I have one extra door speaker, but when one of them goes I think that I'll skip replacing it with another stocker and slap these same speakers in the doors as well. And maybe run a wire off of that 4ohm tweater wire to the tweater in the sail speakers.
Sometimes it can be hard to find the wire colors, so I post them again for you guys:
Sail panel speaker wire colors
Driver side: Dark blue w/ white stripe = speaker (+)
Light green w/ black stripe = Speaker (-)
Passenger: Dark green = speaker (+)
Light blue w/ black stripe = speaker (-)
Peace,
Craig.
