How do you swap out the window motor?
06-02-2002 | 02:20 PM
#1
Thread Starter
Launching!
Joined: Jan 2002
Posts: 254
Likes: 0
From: Plymouth,MA
Re: How do you swap out the window motor? WeatherGuy,
This might help you
<a href="http://home.swbell.net/shoebox/windowmotor.html" target="_blank">
WINDOW MOTOR INSTALL PAGE</a>
Good luck
John
This might help you
<a href="http://home.swbell.net/shoebox/windowmotor.html" target="_blank">
WINDOW MOTOR INSTALL PAGE</a>
Good luck
John
06-02-2002 | 03:17 PM
#2
TECH Fanatic
Joined: Nov 2001
Posts: 1,347
Likes: 1
From: Freeland, MD
Re: How do you swap out the window motor? That is exactly what I was looking for. Thank you! This site rocks!
Also gotta say that this is a surprisingly difficult thing to do. Going to take a few hours.
Also gotta say that this is a surprisingly difficult thing to do. Going to take a few hours.
06-03-2002 | 01:42 AM
#3
TECH Fanatic
Joined: Nov 2001
Posts: 1,347
Likes: 1
From: Freeland, MD
How do you swap out the window motor? I bought a window motor yesterday for my Z since the stock POS is going out. I take off the interior door panel, speaker, clear plastic shield, etc., and can barely see/get my hand in there. And then the thing is held in by rivets as best as I can tell.
Does anyone know what to do? This seems ridiculously hard - a cam swap might be easier on our cars.
Does anyone know what to do? This seems ridiculously hard - a cam swap might be easier on our cars.
06-03-2002 | 09:33 AM
#4
Re: How do you swap out the window motor? Yep, its a slight pain in the ***. I watched Jeff at MTI change one for Dave (blown black Firehawk). You will need a rivet gun.
Tony
Tony
