C.D. Changer
Thread Starter
Teching In
Joined: Jan 2003
Posts: 27
Likes: 0
From: Burlington Iowa
C.D. Changer I bought a JVC 12 disc changer over the X-mas holidays and I installed it in the hatch on the
drivers side.(Next to where you place the T-Tops
in when you want to store them) I have put 2 foam sponges under the changer to stop the changer music from jumping. It doesn't have to be a real rough road either but if you hit any little bump it'll jump. I have the changer bolted down also
with 4 screws. Where do they mount the changer at from the factory? Do you all have any problem with this? <img border="0" title="" alt="[Frown]" src="gr_sad.gif" />
drivers side.(Next to where you place the T-Tops
in when you want to store them) I have put 2 foam sponges under the changer to stop the changer music from jumping. It doesn't have to be a real rough road either but if you hit any little bump it'll jump. I have the changer bolted down also
with 4 screws. Where do they mount the changer at from the factory? Do you all have any problem with this? <img border="0" title="" alt="[Frown]" src="gr_sad.gif" />
Re: C.D. Changer i know it sounds simple but start by checking the horizontal and vertical swich on the sides of the changer., make sure their set the same and on the right position,
