Lets See Pics Of Your Push Button Start Setups
#21
Thread Starter
TECH Veteran
iTrader: (31)
Joined: May 2006
Posts: 4,218
Likes: 3
From: Birmingham AL.
Originally Posted by FireSilverLullaby
Someone serously needs to fab up a smart key, if someone could make a kit hundreds of people would buy it.
#22
Thread Starter
TECH Veteran
iTrader: (31)
Joined: May 2006
Posts: 4,218
Likes: 3
From: Birmingham AL.
ok i just talked to "2muchricemakesmesick" he said that it is not a good idea to try and do the smart key system, he said a mercedes came in bc the key messed up or something and it wouldn't start or anything and it cost upward $800 to get the car to start. so that kind of sucks
#23
Originally Posted by bjamick
i really dont trust mechanics shops so id o it all myself, or i take it to someone i know personally,
i don't know anyone that owns an alignment machine.
#25
here..
Ignition Kill Switch System with Keypad
This ignition kill switch set consists of an illuminated keyboard and a relay. Ignition kill switch can be disarmed with a personal 4-digit code. Special key for disarming the system. The system is armed automatically 15 sec. after the engine has been shut down. "Valet" function for protection at your service station. A red flashing LED indicates that the alarm is armed. Ignition kill switch system is not a kit. Ready to install.
www.apogeekits com/ignition_kill_switch.htm
and then I read the page further...
WE'RE VERY SORRY
THE SP150 IGNITION KILL SWITCH SYSTEM
HAS BEEN PERMANENTLY DISCONTINUED BY OUR SUPPLIER
OUT OF STOCK
Ignition Kill Switch System with Keypad
This ignition kill switch set consists of an illuminated keyboard and a relay. Ignition kill switch can be disarmed with a personal 4-digit code. Special key for disarming the system. The system is armed automatically 15 sec. after the engine has been shut down. "Valet" function for protection at your service station. A red flashing LED indicates that the alarm is armed. Ignition kill switch system is not a kit. Ready to install.
www.apogeekits com/ignition_kill_switch.htm
and then I read the page further...
WE'RE VERY SORRY
THE SP150 IGNITION KILL SWITCH SYSTEM
HAS BEEN PERMANENTLY DISCONTINUED BY OUR SUPPLIER
OUT OF STOCK
Last edited by BitViper; 09-02-2006 at 10:52 AM.
#26
I have a '99T/A with a M6. The clutch has to be pushed in to start. There is a switch mounted on clutch pedal,if you cut the wire going to it,the car won't start.So I put a relay in line with the wire and connected it to a hidden switch.You have to turn the key AND push the switch at the same time.My hope is it will slow down a theif long enough for me to get my 9MM!