Double-Din Write Up
Double-Din Write Up So after some time and many request I did a write up on my double-din installation. Well because of this I decided to redo the whole thing and take pictures of it, it turned out even better, IMO. So here it is....
Head Unit: Pioneer AVIC-D1 Navigation Unit
1. Had to clean out the plastic that was getting in the way and put some wood for the new support structure for the HU. Also had to relocate the HVAC controls to the glove box. Look at all the wires!
2. Fabricated a new trim piece out of some 1/4" plywood. I traced the old trim piece to make the shape and then cut out the area for the HU and in the future a DVD player.
3. Used a piece of ABS plastic to cover over the wood and placed the HU mount into the space. I trimed off the top of the mount to make a little more space.
4. Inserted HU and screwed it... to the mount.
5. Carefully lifted up on the ABS sheet and used a dremel to make a indent on either side so that the screw would remain flush. The screw is going into the wooden pieces as shown in #1. (HU us HEAVY so I could not just use the orginal metal clips)
6. Lastly I used double sided tape to secure down the ABS sheet. Finished, and of course awaiting my new DVD player.
Tell me what you think.
Head Unit: Pioneer AVIC-D1 Navigation Unit
1. Had to clean out the plastic that was getting in the way and put some wood for the new support structure for the HU. Also had to relocate the HVAC controls to the glove box. Look at all the wires!
2. Fabricated a new trim piece out of some 1/4" plywood. I traced the old trim piece to make the shape and then cut out the area for the HU and in the future a DVD player.
3. Used a piece of ABS plastic to cover over the wood and placed the HU mount into the space. I trimed off the top of the mount to make a little more space.
4. Inserted HU and screwed it... to the mount.
5. Carefully lifted up on the ABS sheet and used a dremel to make a indent on either side so that the screw would remain flush. The screw is going into the wooden pieces as shown in #1. (HU us HEAVY so I could not just use the orginal metal clips)
6. Lastly I used double sided tape to secure down the ABS sheet. Finished, and of course awaiting my new DVD player.
Tell me what you think.
this dont look the same as it does in your interior thread?!?!?!?
The HVAC controls could still go there, but it would be a very, very tight fit. When I had the controls there if you look in my interior post the HU was pretty much sitting on top of the controls and the bottom of the radio area, in other words you would have to find another way to secure the controls because once it is dropped the holes on the hvac controls will not line up.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
If you look back at the pics, I said that I am adding a DVD player in the slot cut out in the wood.
2. Fabricated a new trim piece out of some 1/4" plywood. I traced the old trim piece to make the shape and then cut out the area for the HU and in the future a DVD player.
I don't like it at all....it looks funny because its missing the hvac and it looks like its to far up. Since that Double Din doesn't play dvds why not put the hvac were it came stock and a dvd player under your seat somehow or a slim ps2 in the glove box? I myself did a double din install and kept my Hvac controls right there. I actually didn't have to touch the hvac controls and everything fit perfect without really moving anything, just had to make custom brackets to mount it which was a pita, but well worth it. Pics of mine finished are in my sig.
I don't like it at all....it looks funny because its missing the hvac and it looks like its to far up. Since that Double Din doesn't play dvds why not put the hvac were it came stock and a dvd player under your seat somehow or a slim ps2 in the glove box? I myself did a double din install and kept my Hvac controls right there. I actually didn't have to touch the hvac controls and everything fit perfect without really moving anything, just had to make custom brackets to mount it which was a pita, but well worth it. Pics of mine finished are in my sig.
u had yours like mine originally or you had the dvd player under your seat originally? I like the way mine is. I think their is really no way u can fiberglass it all evenly with the hvac controls beneath it which really sucks and I didn't like the idea of having the sides of the hu fiberglassed and the bottom not, so I left it like it is and am happy with it so far.
On The Tree
Joined: May 2006
Posts: 100
Likes: 0
nice work, when you have the HVAC controls on, disassemble it and sand that panel down and paint it to match the interior. custom is the way to go. im thinking of fabing a double din into my 93, but maybe when im more finacially able.
