R U interested in a D.S. rear Sub Box
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Jan 2006
Posts: 304
Likes: 0
From: St. Louis, MO
R U interested in a D.S. rear Sub Box 3 yrs. ago I had purchased a Stealth Box off ebay and it only has about a 1/3 of a cubic ft of air space, not much for sub recommendations. So I decided to come up w/ my own design. I am currently in the process of making these... I have a prototype that has a fiberglassed molded back to get as much air space as possible. I currently have a box that I made installed in my TA and love the performance out of it. If there's alot of interests in this I will produce these to sell. So let me know if you're interested so I know if I need to get off my A$$ to make a lot of these. Here's some pics
This is the so called Stealth box I purchased off ebay. Not much Air Space!
This is a box that I made, and will be selling ones like it if the interest is there!
This is the so called Stealth box I purchased off ebay. Not much Air Space!
This is a box that I made, and will be selling ones like it if the interest is there!
how much are u thinking about selling them for? very nice, looks like it would actually fit well unlike some of them. I'd be interested if the price is good. what subs would u recomend for the airspace ur getting out of these boxes?
should have got this one off of ebay instead 
. .85 cu ft.
http://cgi.ebay.com/ws/eBayISAPI.dll...m=180068047578
. .85 cu ft.http://cgi.ebay.com/ws/eBayISAPI.dll...m=180068047578
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Jan 2006
Posts: 304
Likes: 0
From: St. Louis, MO
Originally Posted by Mike @ FbodyAudio
should have got this one off of ebay instead . .85 cu ft.
http://cgi.ebay.com/ws/eBayISAPI.dll...m=180068047578
. .85 cu ft.http://cgi.ebay.com/ws/eBayISAPI.dll...m=180068047578
Trending Topics
Originally Posted by Screamin_Z
nice box Mike, what else do u sell for the F-Body?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by Mike @ FbodyAudio
working on tweeter pods that replace the triangle mirror trims. Hope to have them done in a couple weeks.
Originally Posted by 2001bluerata
I seen this box on ebay, and when I purchased mine 3 yrs ago, I had not seen anyone making anything like this...Not only that but I paid $110 shipped for something that would've worked but just didn't have enough air space for a sub, IMO! I had my first prototype made 2 yrs ago and have never publicly asked if anyone was interested untill now. My box is constructed of 3/4 MDF like all other top box builders use, and fiberglass resin applied to fleece material to give a hard formed structure. I'm looking at a projected price of around $85.oo shipped, due to vary a little! So if the interest is there let me know.
Originally Posted by Screamin_Z
$85 is cheap, do u know how much air space ur box has?
Originally Posted by qwikz28
mike you finally decided to start making the boxes! can't wait to order mine!
ps- mike this is hotwhip from fbodyaudio.com
ps- mike this is hotwhip from fbodyaudio.com
I have 3 shells made for the 3 orders I'm taking on ebay. Once they are done, I'm done with sub boxes until summer.
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Jan 2006
Posts: 304
Likes: 0
From: St. Louis, MO
Well it looks like I have about 5 interested so far. I have half of the MDF cut for 11 boxes and I'll probably have enough to make a total of 20 right now. I'll see how many more people respond to this, so probably in a couple of weeks, I'll start asking for cutout sizes and fabric colors.