power wire ?
01-16-2007, 05:27 PM
#1
On The Tree
Thread Starter
Join Date: Aug 2005
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
power wire ? ok im getting rdy to install my subs in my camaro and i have read alot about being able run the power wire through the firewall gromet under the computer.....this is fine and i dont have a problem doing it i just cant figure out how to get the computer out so i can find the gromet....i took the bolts out holding it in and tried that way...took the connectors of the pc and tried slidding them out and i cant seem to get them out...any help would be awesome!
01-16-2007, 06:46 PM
#2
TECH Fanatic
Join Date: Oct 2006
Location: Champaign/Chicagoland
Posts: 1,005
Likes: 0
Received 3 Likes
on
3 Posts
hmm....are you sure you got both bolts? I've never heard of this problem before...
sorry that wasn't much help, not sure what else to say..should only have to remove the two 10mm bolts, don't even have to disconnect any connectors..
sorry that wasn't much help, not sure what else to say..should only have to remove the two 10mm bolts, don't even have to disconnect any connectors..
01-16-2007, 07:17 PM
#3
On The Tree
Thread Starter
Join Date: Aug 2005
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
yea i took both bolts out and it seemed like i couldnt pull the entire cluster out....it keep hitting part of the fender mount..(where its like welded)....
i might have to just pull my skirt up alittle bit and pull like a man...lol hahahaha
i might have to just pull my skirt up alittle bit and pull like a man...lol hahahaha
01-16-2007, 07:48 PM
#4
TECH Fanatic
Join Date: Oct 2006
Location: Champaign/Chicagoland
Posts: 1,005
Likes: 0
Received 3 Likes
on
3 Posts
the space is pretty tight -- be sure not to hurt and paint....remember: just wiggle and pull....maybe put more emphasis on the wiggling (but of course don't forget to pull too!)