How to program Viper transmitter?
01-30-2007, 09:35 PM
#1
Staging Lane
Thread Starter
Join Date: Oct 2004
Location: Stillwater, OK
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
How to program Viper transmitter? I've been searching but can't find anything.
Does anyone know how to program the remotes for a Viper 560XV? I have 2 original ones and would like the one I just bought off ebay to work with the other two as well.
Does anyone know how to program the remotes for a Viper 560XV? I have 2 original ones and would like the one I just bought off ebay to work with the other two as well.
02-01-2007, 03:43 PM
#2
TECH Enthusiast
iTrader: (11)
Join Date: Dec 2002
Location: Iowa
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
This should point you in the right direction. http://www.drdetailshop.com/remoteprogram.html
On my 791xv I had too....
1. Open door
2. Turn key to "on" position
3. Within 5 secs press and release the valet/program,press again and hold it.
4. While holding the valet/program button press the button (I just pressed lock)from the transmitter you wish to assign to that channel.
5. Release the valet button
You may have to find out how many times to push the valet button as yours may be different,but thats the basic way to do it.
On my 791xv I had too....
1. Open door
2. Turn key to "on" position
3. Within 5 secs press and release the valet/program,press again and hold it.
4. While holding the valet/program button press the button (I just pressed lock)from the transmitter you wish to assign to that channel.
5. Release the valet button
You may have to find out how many times to push the valet button as yours may be different,but thats the basic way to do it.
Last edited by Jake the SSnake; 02-01-2007 at 03:51 PM.
