Please help.. problem with guages..???

Reply Subscribe

Thread Tools

Search this Thread

Feb 14, 2007 | 05:49 PM

01Z0H6

Thread Starter

TECH Junkie

iTrader: (63)

Joined: Nov 2001

Posts: 3,638

Likes: 101

From: Hideaway Tx

Please help.. problem with guages..???

Recently had my car rebuilt...
Everything is hooked up... grounded etc...

The only guages that work are the fuel,voltage...speedo..

oil press,temp,RPM guages do NOT work...???

Please your ideas..??

Maybe i need to buy a new wiring harness.... as the shop that "did" do my car prior to my current set up may have simply just jerked the harness out..??

Your comments please...

Thanks.

Feb 15, 2007 | 05:37 PM

SSmoked2002FL

Teching In

Joined: Feb 2007

Posts: 2

Likes: 0

i am having the exact same problem... i believe it is the camshaft positioning sensor... or so thats what i was told... let me know if u find an answer

Feb 28, 2007 | 01:00 AM

wazup04

Teching In

Joined: Feb 2007

Posts: 1

Likes: 0

me too lol

Feb 28, 2007 | 01:16 AM

Duffster

11 Second Club

iTrader: (103)

Joined: Aug 2005

Posts: 2,633

Likes: 1

From: South of West Point Iowa

cheapest option is to remove your cluster and reinstall to see if something was loose. You use a 7mm socket to get the hidden two screws (for Camaros) or just yank the cover off for Firebirds/TAs. Then using the same 7mm and a socket extension remove 4 7mm screws from the 4 corners of the cluster. You don't have to remove the cluster completely, just loose enough to pull out and reinstall. Reverse the screw installation. I hope this helps!

Duff

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last