Can this be done?
Thread Starter
On The Tree
Joined: Apr 2005
Posts: 131
Likes: 0
From: President of Sixpackistan
Can this be done? I have a T/A 'vert with Monsoon.
For stealth purposes, I'd like to retain the head unit, and use an aftermarket amp to drive the speakers. I'd also like to change the door speakers. I believe the factory wiring is jacked up, so I would rewire the system.
So, has anyone used the Monsoon head unit, and an aftermarket amp, and aftermarket door speakers?
Thanks!
For stealth purposes, I'd like to retain the head unit, and use an aftermarket amp to drive the speakers. I'd also like to change the door speakers. I believe the factory wiring is jacked up, so I would rewire the system.
So, has anyone used the Monsoon head unit, and an aftermarket amp, and aftermarket door speakers?
Thanks!
Originally Posted by 95bat
You can modify the factory deck to run RCAs straight from the deck. It will be a lot better than any other option.
You could just as easily use a PAC piece that is a High-level (speaker level) to Low-Level (RCA level) output. Been around for a long time.
As simple trick you could do make a PAC filter. All you need is some resistor or a variable resistor (Aka Pot's or Potentiometer.
http://en.wikipedia.org/wiki/Potentiometer
This is basically what you get when you buy the kit. It's just a speaker level input thru a Pot out to a set of RCA jacks (female) Cost is so close it's better to just get the PAC level device.
For front and rear, just use 2.
