6.5 Subs to buy
#1
6.5 Subs to buy
I have been looking to replace the back subs.. and man its hard finding a 6.5 in rockford fosgate or jl any people know a link to buying those or another brand that is great w/link, thanks.
#2
I just installed a pair of CDT AUDIO M6's and they sound great.....
They are a true midbass/sub designed for IB use. Bad thing is that they are only a SVC 4ohm driver
otherwise Elemental Designs make a 7Kv.2 that is cheaper and will work.
They are a true midbass/sub designed for IB use. Bad thing is that they are only a SVC 4ohm driver
otherwise Elemental Designs make a 7Kv.2 that is cheaper and will work.
#3
JL's 6w0's work as well... and are true mid subs. They'll need more power than the factory system though. You can get a pair for around $150 new if you can find them.
I know "someone" that has a pair "N"IB that was only test fitted then went a diffrent route because they didn't want to have to d an amp just for the mid-subs
I'm not one here too much any more but if you want info just "email" me not PM as I may not get it for months LOL
I know "someone" that has a pair "N"IB that was only test fitted then went a diffrent route because they didn't want to have to d an amp just for the mid-subs
I'm not one here too much any more but if you want info just "email" me not PM as I may not get it for months LOL
#4
being a Camaro, you have several options as mentioned because you can run SVC subs no problem as well -- I installed eu700's in my brother's car and he loves them, but if you are looking more for midbass fill -- they are NOT for you.
#5
Originally Posted by JR HAWK 9
I just installed a pair of CDT AUDIO M6's and they sound great.....
They are a true midbass/sub designed for IB use. Bad thing is that they are only a SVC 4ohm driver
otherwise Elemental Designs make a 7Kv.2 that is cheaper and will work.
They are a true midbass/sub designed for IB use. Bad thing is that they are only a SVC 4ohm driver
otherwise Elemental Designs make a 7Kv.2 that is cheaper and will work.
#7
I just installed the Kicker SSMB6... sucks no amp yet for them but monday for sure.. should be good 200 rms for both.. amp is going to be a rockford fosgate so it will power them up.
Trending Topics
#16
The ED subs require you to either cut the inside ofthe sail panel out to make room for the magnet or make a mdf spacer that mounts the sub further out. You have a choice but one or the other is neccessary. Nice sub though!! So sgt. is right either way your gonna have to mod unless you go with a traditional midbass. I used CDT CL-6. Great mid bass for around $80.00. Fits in stock opening. There are a few others as well.
#19
Originally Posted by Cobra2WS6
So u can power the cdt m6 off the stock head unit?
#20
Originally Posted by Cobra2WS6
So u can power the cdt m6 off the stock head unit?