Install Time! YEAH!
Install Time! YEAH! This is the begining of my install, This is a pic of the Sound deadning material ( This takes FOREVER) And Wooden trim rings for my 6.5 mids. The Pile of camaro insides. and the mess I call a camaro. Enjoy... And theres a pic in here of my neglected bike too... Poor thing
TECH Fanatic
Joined: Oct 2006
Posts: 1,003
Likes: 3
From: Champaign/Chicagoland
Originally Posted by presto_z
i kept all my screws in ziplock bags and made sure they were properly labeled...
Trending Topics
TECH Senior Member
Joined: Apr 2004
Posts: 6,157
Likes: 1
From: Texas
Originally Posted by presto_z
i kept all my screws in ziplock bags and made sure they were properly labeled... looks good...
is that v1 you used??
is that v1 you used??
thats a great idea. I recently took my entire car apart and labeled every bolt in a ziplock bag
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by 2MuchRiceMakesMeSick
thats a great idea. I recently took my entire car apart and labeled every bolt in a ziplock bag
was that sarcasm?? its really hard to tell over the interweb unless you use smiley's
elemental designs sells it for $1.00 per sq ft which is a bargain, but if you call them up and ask for the "forum discount" (their forum not ours) they will knock off 20% making it .80 per sq ft. you can order anywhere from 3sq ft to 3,333sq ft.. any amount you want they can supply you with...
Is it eDead?
I did only the hatch area in my car last year with eDead. Also I added some behind the sailpanel since it is a pretty open area back there. I was suprised just doing that area how much it increases the bass(I was able to turn down the amp a little and get the same bass). I really don't have the patience to do the entire front of the car, but the back area was a simple job and sticks good. Plus road noise was even improved and covered up some of the sound of the gear whine lol.
What was the weight of all the material you used?
I did only the hatch area in my car last year with eDead. Also I added some behind the sailpanel since it is a pretty open area back there. I was suprised just doing that area how much it increases the bass(I was able to turn down the amp a little and get the same bass). I really don't have the patience to do the entire front of the car, but the back area was a simple job and sticks good. Plus road noise was even improved and covered up some of the sound of the gear whine lol.
What was the weight of all the material you used?
Also, the V1SE is a great bargain. Call up and ask for Aaron (641-792-2501)
UE is a great product in making a fantastic difference with only one layer. It is the thickest sound dampening on the market. about 2 times thicker thank Dynamat extreme.
UE is a great product in making a fantastic difference with only one layer. It is the thickest sound dampening on the market. about 2 times thicker thank Dynamat extreme.
looks great! how many hours do you have in it so far? how much did you order up anyways? when you ordered up how did you mention you were a member of that forum? hehe rolling thunder of questions
