LS1TECH - Camaro and Firebird Forum Discussion
Got it gutted...now just need to pull the donor in and get out the good bits
Got it gutted...now just need to pull the donor in and get out the good bits
0 2022/12/05 16:49:04
0 2022/12/05 16:49:08
0 2022/12/05 16:49:13
0 2023/01/02 07:40:40
0 2023/04/09 17:14:18
2008 impreza been sitting for a while due to bad head gaskets...
2008 impreza been sitting for a while due to bad head gaskets...
0 2023/04/10 02:36:16
Flat boy out
Flat boy out
0 2023/04/10 02:36:22
0 2023/04/10 02:36:27
Out with the old trans
Out with the old trans
0 2023/04/10 02:36:31
0 2023/04/10 02:36:35
Plenty of room for activities
Plenty of room for activities
0 2023/04/10 02:36:39
Lq4 pulled out of 99 2500 donor...beeds some love
Lq4 pulled out of 99 2500 donor...beeds some love
0 2023/04/10 02:36:44
Found a wrx in junkyard and swiped interior
Found a wrx in junkyard and swiped interior
0 2023/04/10 02:36:48
Stained and dirty
Stained and dirty
0 2023/04/10 02:36:53
Striped down to wash fabric
Striped down to wash fabric
0 2023/04/10 02:36:57
Reassembled and looking better
Reassembled and looking better
0 2023/04/10 02:37:02
Before
Before
0 2023/04/10 02:37:06
0 2023/04/10 02:37:11
After
After
0 2023/04/10 02:37:15
0 2023/04/10 02:37:18
Much better
Much better
0 2023/04/10 02:37:22
Remived old iron heads in favor of some 706
Remived old iron heads in favor of some 706
0 2023/04/10 02:37:26
Pac springs to go with the sloppy 2 cam
Pac springs to go with the sloppy 2 cam
0 2023/04/10 02:37:30
Polished up a bit
Polished up a bit
0 2023/04/10 02:37:34
New subframe from tssfab.com to hold the ls in the subie. Off to powder coat
New subframe from tssfab.com to hold the ls in the subie. Off to powder coat
0 2023/04/10 02:37:38
Checking clearances for oil pan
Checking clearances for oil pan
0 2023/04/10 02:37:42
Goofy shaped pan. Made for ls swapping a 350z
Goofy shaped pan. Made for ls swapping a 350z
0 2023/04/10 02:37:46
Wiring...never fun
Wiring...never fun
0 2023/04/10 02:37:50
Removing unnecessary circuits and fixing some failed ones
Removing unnecessary circuits and fixing some failed ones
0 2023/04/10 02:37:55
All cleaned up and reworked
All cleaned up and reworked
0 2023/04/10 02:38:00
Sub frame in
Sub frame in
0 2023/04/10 02:38:04
Finally in its new home
Finally in its new home
0 2023/04/10 02:38:07
Just enough clearance with f body accessories
Just enough clearance with f body accessories
0 2023/04/10 02:38:11
0 2023/04/10 02:38:16
Converting t56 from lt to ls
Converting t56 from lt to ls
0 2023/04/10 02:38:21
0 2023/04/10 02:38:27
All ready to go in with remote bleeder
All ready to go in with remote bleeder
0 2023/04/10 02:38:32
0 2023/04/10 02:38:37
0 2023/04/10 02:38:41
0 2023/04/10 02:38:45