LS1TECH - Camaro and Firebird Forum Discussion
Picked up beefier diff out of a legacy spec B. R180 on the left and r160 on the right
Picked up beefier diff out of a legacy spec B. R180 on the left and r160 on the right
0 2023/06/10 20:14:49
0 2023/06/10 20:14:58
Splines on the new diff are mich bigger and the diff is wider. I got legacy spec b axles with the diff hoping the would have the correct hub side spline but they werent. So i had to make a hybrid axle using the impreza outer cups and bearing races and put them on the other axles
Splines on the new diff are mich bigger and the diff is wider. I got legacy spec b axles with the diff hoping the would have the correct hub side spline but they werent. So i had to make a hybrid axle using the impreza outer cups and bearing races and put them on the other axles
0 2023/06/10 20:15:04
Old tiny r160 diff
Old tiny r160 diff
0 2023/06/10 20:15:10
New r180 and hybrid axles fit perfect...even used same driveshaft
New r180 and hybrid axles fit perfect...even used same driveshaft
0 2023/06/10 20:15:16
0 2023/06/10 20:15:26
Suspesion was slammed and rode like a brick with all that weight. The 2008 impreza had the softest springs out of any year ever. And the brakes where feeling the weight also. So i got some adjustable coilovers and wrx 4 pot brakes and its soo mich better
Suspesion was slammed and rode like a brick with all that weight. The 2008 impreza had the softest springs out of any year ever. And the brakes where feeling the weight also. So i got some adjustable coilovers and wrx 4 pot brakes and its soo mich better
0 2023/06/10 20:15:34
Was having some IAT heatsoak issues with the maf directly behind the radiator so i moved it down into wheel well
Was having some IAT heatsoak issues with the maf directly behind the radiator so i moved it down into wheel well
0 2023/06/10 20:15:39
Injector duty cycle waay up there over 100% even with the aem 340 pump over running the vette regulator keeping fuel pressure over 70psi all the time
Injector duty cycle waay up there over 100% even with the aem 340 pump over running the vette regulator keeping fuel pressure over 70psi all the time
0 2023/06/10 20:15:45
Picked up some 60lb flex injectors and an adjustable regulator to keep all that in check
Picked up some 60lb flex injectors and an adjustable regulator to keep all that in check
0 2023/06/10 20:15:54
0 2023/06/16 09:50:33
...maybe
...maybe
0 2023/06/16 09:58:59
0 2023/07/06 16:49:56
0 2023/07/06 16:50:01
0 2023/07/06 16:50:05
0 2023/07/06 16:54:45
0 2023/07/06 16:54:51
0 2023/07/06 16:54:55
0 2023/07/06 16:54:58
0 2023/07/06 16:55:04
0 2023/07/06 16:55:08
0 2023/07/06 16:55:12
Downpipe ingredients
Downpipe ingredients
0 2023/07/06 17:01:21
Schedule 40 stainless elbow...stout chunk of metal
Schedule 40 stainless elbow...stout chunk of metal
0 2023/07/06 17:01:25
Tacked in with flange
Tacked in with flange
0 2023/07/06 17:01:28
Angle looks good...it was tough holding all this and turbo while trying to mark it to get alginment right
Angle looks good...it was tough holding all this and turbo while trying to mark it to get alginment right
0 2023/07/06 17:01:32
Turbo mounted...getting spicy
Turbo mounted...getting spicy
0 2023/07/06 17:01:36
Turbo manifold with crossover modified from original layout
Turbo manifold with crossover modified from original layout
0 2023/07/06 17:01:42
Hotside wrapped and coming together
Hotside wrapped and coming together
0 2023/07/06 17:01:46
Wastegate in and heater outlets tapped and plugged
Wastegate in and heater outlets tapped and plugged
0 2023/07/06 17:08:24
0 2023/07/06 17:08:28
Downpipe constructed
Downpipe constructed
0 2023/07/06 17:08:32
A little heat treatment
A little heat treatment
0 2023/07/06 17:08:37
Hotside complete
Hotside complete
0 2023/07/06 17:08:41
Now time for the coldside
Now time for the coldside
0 2023/07/06 17:08:45
Dump pipe fitted
Dump pipe fitted
0 2023/07/06 17:12:33
0 2023/07/06 17:12:38
Big ol cooler gonna need to brackets and alot of cutting to fit
Big ol cooler gonna need to brackets and alot of cutting to fit
0 2023/07/06 17:12:42
0 2023/07/06 17:12:47
Dump pipe fitted
Dump pipe fitted
0 2023/07/06 17:16:15