LS1TECH - Camaro and Firebird Forum Discussion
Most ppl just plate of the rear vent ports on the head. I decided to keep mine.
Most ppl just plate of the rear vent ports on the head. I decided to keep mine.
0 2018/01/25 10:11:17
0 2018/01/25 10:11:18
First set I had FIC 42 lb injectors, but Steve @ Frost tunes advised against them. So I just used them for mock up.
First set I had FIC 42 lb injectors, but Steve @ Frost tunes advised against them. So I just used them for mock up.
0 2018/01/25 10:11:20
Angle torque tool I used to torque the head bolts down to spec.
Angle torque tool I used to torque the head bolts down to spec.
0 2018/01/25 10:11:22
0 2018/01/25 10:11:23
0 2018/01/25 10:11:25
Decided to run my MAP sensor up front.
Decided to run my MAP sensor up front.
0 2018/01/25 10:17:56
All buttoned up under the hood.
All buttoned up under the hood.
0 2018/01/25 10:17:57
0 2018/01/25 10:17:59
No trap door mod on this car.
No trap door mod on this car.
0 2018/01/25 10:18:00
Installed the Racetronix pump along with the hot wire kit.
Installed the Racetronix pump along with the hot wire kit.
0 2018/01/25 10:18:02
Bought grade 8 bolts (left) to replace the weak bolts(right) supplied with the Speed engineering 3" dual exhaust.
Bought grade 8 bolts (left) to replace the weak bolts(right) supplied with the Speed engineering 3" dual exhaust.
0 2018/01/25 10:18:05
Almost all lined up, not too bad installation.
Almost all lined up, not too bad installation.
0 2018/01/25 10:18:07
0 2018/01/25 10:18:09
0 2018/01/25 10:18:11
0 2018/01/25 10:18:13
This was installed with a UMI Tunnel mount Torque Arm.
This was installed with a UMI Tunnel mount Torque Arm.
0 2018/01/25 10:18:14
0 2018/01/25 10:18:16
0 2018/01/25 10:18:17
Ready to hit the pavement. Only took 2 weeks working on it after hours.
Ready to hit the pavement. Only took 2 weeks working on it after hours.
0 2018/01/25 10:18:19
First cruise after the HCI install still on Mail tune from Frost.
First cruise after the HCI install still on Mail tune from Frost.
0 2018/01/25 10:24:34
Fast 36 Ib injectors installed.
Fast 36 Ib injectors installed.
0 2018/01/25 10:24:36
Catch cans came in.
Catch cans came in.
0 2018/01/25 10:24:38
Notice where I installed them?
Notice where I installed them?
0 2018/01/25 10:24:40
0 2018/01/25 10:24:41
And it works.
And it works.
0 2018/01/25 10:24:43
Got it dyno tuned, baseline was 450 on the mail tune. Reading on the high side but I did baseline on the same dyno months ago so I know how much I gained.
Got it dyno tuned, baseline was 450 on the mail tune. Reading on the high side but I did baseline on the same dyno months ago so I know how much I gained.
0 2018/01/25 10:24:44
0 2018/01/25 10:24:47
Time for some new wheels.
Time for some new wheels.
0 2018/01/25 10:24:49
Scored a set of Fikse FM5's wheels from a fellow Louisiana ls1tech member, they just needed to be refinished.
Scored a set of Fikse FM5's wheels from a fellow Louisiana ls1tech member, they just needed to be refinished.
0 2018/01/26 10:17:40
Test fitting the rears.
Test fitting the rears.
0 2018/01/26 10:17:41
0 2018/01/26 10:17:43
0 2018/01/26 10:17:45
Stripping the clear coat.
Stripping the clear coat.
0 2018/01/26 10:17:47
0 2018/01/26 10:17:49
Wet sanding, removing the machine finish.
Wet sanding, removing the machine finish.
0 2018/01/26 10:17:51
0 2018/01/26 10:17:52
0 2018/01/26 10:17:54
All polished up.
All polished up.
0 2018/01/26 10:17:56
0 2018/01/26 10:17:57