Cam only LS6 M6 in the 10's
#1
11 Second Club
Thread Starter
iTrader: (14)
Join Date: May 2007
Location: Aurora IL
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
Cam only LS6 M6 in the 10's
Today i went out to US41 in I.N. I went there today to try and run a 10sec run.
And i met my goal of this year today.
And a big Thanx to Larry At Speed Inc For all the help on getting this car in the 10.xx's
60 foot ---1.48
330 foot---4.495
1/8th---6.973
1/8th mph----98.95
1000 foot---9.101
1/4--- 10.88
mph 126.81
and the Mods to the car are
Stock Ls6 long block
Chrs1313 ramair
fast toys 85mm lid
z06 maf
Vindicator 240/244 605/596 on a 112lsa
EWP
kooks 1-7/8's header kooks Y with 4in cutout and mufflex cat back
42# injectors
fast 90/90 setup
powerbond underdrive pulley
tick perf stage 2 M6 tex 0z700 clutch
2 step set at 6400rpm
3.5 moly drive shaft
Fab nine rear end with steel spool and 4.56 gears
strange shocks front and rear S/A Front set to 3 rears set to 6
28x10.5x15s M/T slicks
Had some good air today to waiting to see what the air was when i made my pass @ 18:15:30 Oh and the car has more left in it the 60 was weak and i think i can get more out of it but i will see.
Oh and title change please
Rob
And i met my goal of this year today.
And a big Thanx to Larry At Speed Inc For all the help on getting this car in the 10.xx's
60 foot ---1.48
330 foot---4.495
1/8th---6.973
1/8th mph----98.95
1000 foot---9.101
1/4--- 10.88
mph 126.81
and the Mods to the car are
Stock Ls6 long block
Chrs1313 ramair
fast toys 85mm lid
z06 maf
Vindicator 240/244 605/596 on a 112lsa
EWP
kooks 1-7/8's header kooks Y with 4in cutout and mufflex cat back
42# injectors
fast 90/90 setup
powerbond underdrive pulley
tick perf stage 2 M6 tex 0z700 clutch
2 step set at 6400rpm
3.5 moly drive shaft
Fab nine rear end with steel spool and 4.56 gears
strange shocks front and rear S/A Front set to 3 rears set to 6
28x10.5x15s M/T slicks
Had some good air today to waiting to see what the air was when i made my pass @ 18:15:30 Oh and the car has more left in it the 60 was weak and i think i can get more out of it but i will see.
Oh and title change please
Rob
Last edited by 98blueSScamaro; 10-12-2009 at 10:09 AM.
Trending Topics
#16
10 Second Club
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
I can relate to you there. It was my goal for over 7 years now, and I too just recently achieved it. Well I'm amazed at the combo and how well it runs. Looks like I have my work cut out for me, if I plan on getting into the 9's now- lol.
Good Job Man.
James
Good Job Man.
James
#20
Congrats man.. I know how you feel just got my 10 pass. I do have a question though! Umm saying cam only is incorrect. Take away any of that supporting hardware and you would not have a 10 pass..I.e.
Chrs1313 ramair
fast toys 85mm lid
z06 maf
Vindicator 240/244 605/596 on a 112lsa
EWP
kooks 1-7/8's header kooks Y with 4in cutout and mufflex cat back
42# injectors
fast 90/90 setup
powerbond underdrive pulley
tick perf stage 2 M6 tex 0z700 clutch
2 step set at 6400rpm
3.5 moly drive shaft
Fab nine rear end with steel spool and 4.56 gears
strange shocks front and rear S/A Front set to 3 rears set to 6
28x10.5x15s M/T slicks
So it aint just a cam unless you mean short block terms or something. But once again impressive.
Chrs1313 ramair
fast toys 85mm lid
z06 maf
Vindicator 240/244 605/596 on a 112lsa
EWP
kooks 1-7/8's header kooks Y with 4in cutout and mufflex cat back
42# injectors
fast 90/90 setup
powerbond underdrive pulley
tick perf stage 2 M6 tex 0z700 clutch
2 step set at 6400rpm
3.5 moly drive shaft
Fab nine rear end with steel spool and 4.56 gears
strange shocks front and rear S/A Front set to 3 rears set to 6
28x10.5x15s M/T slicks
So it aint just a cam unless you mean short block terms or something. But once again impressive.