10's or bust
#1
On The Tree
Thread Starter
Join Date: Feb 2008
Location: SAN JOSE ,CA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
10's or bust
How is it going folks. It's been a wail but I'm back. Would like to post my project 1998 Camaro SS. Quick run down, MS3 cam with 02 top end includes ls6 intake, th400 trans, Nitrous outlet plate kit and basic suspension mods. Hoping to break into the 10's with a 100shot and circle D nitrous converter. Gears are 3.90 on a Mickey Thompson 295/55/15. Any advise besides the mods I posted to help me get into the 10's I would greatly appreciate it.
Nitrous kit not installed yet
Th400 trans. No T-brake
1998 Camaro SS
Viking Performance struts and shocks, 300lb Spring rate
Nitrous kit not installed yet
Th400 trans. No T-brake
1998 Camaro SS
Viking Performance struts and shocks, 300lb Spring rate
Last edited by wichoms4; 07-10-2016 at 12:34 PM.
#3
On The Tree
Thread Starter
Join Date: Feb 2008
Location: SAN JOSE ,CA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
#5
On The Tree
Thread Starter
Join Date: Feb 2008
Location: SAN JOSE ,CA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#12
On The Tree
Thread Starter
Join Date: Feb 2008
Location: SAN JOSE ,CA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Motor is out. Going to clean up a few things. Also going to be installing new struts and shocks with new strut mounts. Would like a k member but a little tight on money. Il keep you guys posted.
#14
On The Tree
Thread Starter
Join Date: Feb 2008
Location: SAN JOSE ,CA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Quaick update. Finally got around to washing the car. Still waiting on my driveshaft and off to get tune. Unsure what shot to start off with. Going talk to the tuner and what he suggests
#15
On The Tree
Thread Starter
Join Date: Feb 2008
Location: SAN JOSE ,CA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Quick update. Went to my local drive line shop and got my drive line made. Big thanks to Steve over at Southbay Driveline. Got sponsored I was surprised. He spec me a 3.5 drive shaft rated 1000tq. Still need few more parts and off to get tune.
#17
11 Second Club
iTrader: (107)
I don't see a problem with you going at least mid 10's. My cam is similar to yours and just on motor I made a 11.1 pass at Sac raceway this past wednesday. Prep is key though, I was slip and sliding when I tried to use the nitrous.
Do you have 15x8 or 15x10 rear rim? I like that tire size. Keep us posted!!
Do you have 15x8 or 15x10 rear rim? I like that tire size. Keep us posted!!
#18
On The Tree
Thread Starter
Join Date: Feb 2008
Location: SAN JOSE ,CA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
#19
On The Tree
Thread Starter
Join Date: Feb 2008
Location: SAN JOSE ,CA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
I don't see a problem with you going at least mid 10's. My cam is similar to yours and just on motor I made a 11.1 pass at Sac raceway this past wednesday. Prep is key though, I was slip and sliding when I tried to use the nitrous.
Do you have 15x8 or 15x10 rear rim? I like that tire size. Keep us posted!!
Do you have 15x8 or 15x10 rear rim? I like that tire size. Keep us posted!!
#20
On The Tree
Thread Starter
Join Date: Feb 2008
Location: SAN JOSE ,CA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Finally came across this used Moser 9inch rearend. Should fix my worries about breaking at the track. Pretty excited it's been four years in the making. Stay tune for more.
Moser 9inch
Nodular iron casing 4.11 31 spline axles
Moser 9inch
Nodular iron casing 4.11 31 spline axles