is my oil pressure too high?
#1
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Jan 2006
Location: Atlantic city nj
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
is my oil pressure too high?
i just finished my heads / cam install, also replaced the oil pump with a mellings 296. the car turned right on , but i was looking at the oil pressure and it reads at 60 at idle. i dont know if this is ok. i used the blue spring, and the black o ring that came with the pump. If this is ok then what is too high at idle , and while driving? What do you think?
#2
TECH Addict
iTrader: (12)
60 isnt bad. I see 75psi cold oil pressure at idle pegged at 100psi above 1500rpm cold. When its hot it idles at about 50psi and pegs at 100psi WOT so i think you are fine. The black o-ring is correct. The green one if for the truck pick up style if i remember correctly.
#3
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
i just finished my heads / cam install, also replaced the oil pump with a mellings 296. the car turned right on , but i was looking at the oil pressure and it reads at 60 at idle. i dont know if this is ok. i used the blue spring, and the black o ring that came with the pump. If this is ok then what is too high at idle , and while driving? What do you think?
#4
TECH Enthusiast
iTrader: (51)
Join Date: Jul 2008
Location: Billings, Mt
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
the only prob with that much oil pressure, is it bypasses oil by the oil filter when its that high when its cold. besure to you a very good oil filter, because they have a spring instead of a crush sleave like the cheap ones.
#5
11 Second Club
iTrader: (20)
Join Date: Oct 2006
Location: Virginia
Posts: 3,131
Likes: 0
Received 0 Likes
on
0 Posts
what gauge are you going by???im pretty sure the gauges in anything newer than the 98 are just dummy gauges...meaning its either reading low or high...if so get an aftermarket gauge and put in the car....