11.9 = ___ 1/8?
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Dallas
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
11.9 = ___ 1/8?
my buddy just recently went to the track and ran an 11.9 with a camd stalld z28 w.out ls6 intake. he also has 315 nittos on a 9inch rim, with 342 gears.
I am just wondering what his 1/8 shoulda been?
I am just wondering what his 1/8 shoulda been?
#6
Launching!
Join Date: Oct 2007
Location: Modesto, Ca
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
My buddy just ran consistent 11.8's 11.9's at the track tonight, torquer v2 cam, 3k stall, 3.73's, MT's, his timeslips with 1.6 sixty's were 7.5 in the 8th @ 92 mph...
#7
TECH Fanatic
iTrader: (4)
Join Date: Feb 2008
Location: S.W. Missouri
Posts: 1,291
Likes: 0
Received 0 Likes
on
0 Posts
In general, most 7.3 1/8 will be 11.5s or lower, but alot depends on the 60ft. & how its geared, along with how good its pulling in the last 660, i ran a 12.01 with a 7.8x in the 1/8, but i was pulling really hard in the last 660 & trapped 115 from 89 in the 1/8, this was on a 1.80 60ft. looking at my slips from when i ran 7.1s, 7.2s, i normally ran 11.0s too 11.2s, this was on 1.57-1.62 60fts., but i've gone 10.87 with a 7.00 on a 1.62, so there are variables.
Trending Topics
#8
10 Second Club
iTrader: (9)
Join Date: Jun 2007
Location: Fairbanks AK
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
In general, most 7.3 1/8 will be 11.5s or lower, but alot depends on the 60ft. & how its geared, along with how good its pulling in the last 660, i ran a 12.01 with a 7.8x in the 1/8, but i was pulling really hard in the last 660 & trapped 115 from 89 in the 1/8, this was on a 1.80 60ft. looking at my slips from when i ran 7.1s, 7.2s, i normally ran 11.0s too 11.2s, this was on 1.57-1.62 60fts., but i've gone 10.87 with a 7.00 on a 1.62, so there are variables.
and to the OP....I find it really hard to believe he's running a 7.3 in the 1/8th with those kind of the 1/4 mile times, but who knows. You'd have to know more about his setup as LM97Z is stating.
#10
TECH Fanatic
iTrader: (4)
Join Date: Feb 2008
Location: S.W. Missouri
Posts: 1,291
Likes: 0
Received 0 Likes
on
0 Posts
You must have been booking it on the big end...or had some really good air
and to the OP....I find it really hard to believe he's running a 7.3 in the 1/8th with those kind of the 1/4 mile times, but who knows. You'd have to know more about his setup as LM97Z is stating.
and to the OP....I find it really hard to believe he's running a 7.3 in the 1/8th with those kind of the 1/4 mile times, but who knows. You'd have to know more about his setup as LM97Z is stating.