Anyone in the 11's sound stock?
07-13-2005, 10:53 PM
#1
11 Second Club
Thread Starter
iTrader: (25)
Join Date: Jun 2005
Location: Texarkana, Texas
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Anyone in the 11's sound stock? Do any of you have a stock sounding cam and run in the 11's. I am considering the TR Cheatr cam, but not sure if it will suppport the et's I'm looking for. Car is a daily driver, so I don't want to gut it for weight reduction. I'm hoping to go 11's with Ls6 intake, cam, Lt's, stall, and 12 bolt with dr's. I want a good stock sounding sleeper. Maybe not stock, but at least close, with very little lope. What do you guys think?
07-18-2005, 02:19 PM
#5
11 & 7 Second Clubs
Join Date: Oct 2004
Location: Motorhome, Freeways, Truckstops, Pits
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
My F13 with 114 lsa does not sound stock. If you have any meaningful lift and duration, you will need a lot of lsa (116, 117) to make it sound like stock. LPE's cam might work for you.
Originally Posted by Xtremespeed
Do any of you have a stock sounding cam and run in the 11's. I am considering the TR Cheatr cam, but not sure if it will suppport the et's I'm looking for. Car is a daily driver, so I don't want to gut it for weight reduction. I'm hoping to go 11's with Ls6 intake, cam, Lt's, stall, and 12 bolt with dr's. I want a good stock sounding sleeper. Maybe not stock, but at least close, with very little lope. What do you guys think?
07-18-2005, 06:21 PM
#6
11 Second Club
Thread Starter
iTrader: (25)
Join Date: Jun 2005
Location: Texarkana, Texas
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Are you talking about the GT2-3? You guys have some quick cars. What are you doing to get in the 11's with stock cams? All bolt on's, heads, and weight reduction?
I want a car that can run maybe even mid 11's at the track, and most people wouldn't be able to tell it wasn't stock on the street.
I want a car that can run maybe even mid 11's at the track, and most people wouldn't be able to tell it wasn't stock on the street.
07-19-2005, 05:55 PM
#7
11 & 7 Second Clubs
Join Date: Oct 2004
Location: Motorhome, Freeways, Truckstops, Pits
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
I ran a GT2 with a Vortech SQ and a Venom 2000, 100shot setup and it ran like a dream. Oh, how I wish I had that 2001 SS back.
It's going to be very difficult to run 11's with a car that looks and sounds stock. I can run 11's with a 346 with F13 at 114 lsa through Randon Tech cats and Magnaflow exhaust, but if you listen closely you can hear the cam.
It's going to be very difficult to run 11's with a car that looks and sounds stock. I can run 11's with a 346 with F13 at 114 lsa through Randon Tech cats and Magnaflow exhaust, but if you listen closely you can hear the cam.
Originally Posted by Xtremespeed
Are you talking about the GT2-3? You guys have some quick cars. What are you doing to get in the 11's with stock cams? All bolt on's, heads, and weight reduction?
I want a car that can run maybe even mid 11's at the track, and most people wouldn't be able to tell it wasn't stock on the street.
I want a car that can run maybe even mid 11's at the track, and most people wouldn't be able to tell it wasn't stock on the street.
Trending Topics
07-19-2005, 10:57 PM
#8
11 Second Club
iTrader: (3)
Join Date: Aug 2004
Location: S. Jersey
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Xtremespeed
Are you talking about the GT2-3? You guys have some quick cars. What are you doing to get in the 11's with stock cams? All bolt on's, heads, and weight reduction?
I want a car that can run maybe even mid 11's at the track, and most people wouldn't be able to tell it wasn't stock on the street.
I want a car that can run maybe even mid 11's at the track, and most people wouldn't be able to tell it wasn't stock on the street.
down below with a video to check out. I would say the converter was the best thing that I did to the car. Race weight was 3525. Hope this helps, jt
07-20-2005, 01:03 AM
#9
9 Second Club
iTrader: (2)
Join Date: Jun 2005
Location: Reston, VA
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
I just had the LPE GT7 cam installed.... my car runs smoother then stock on the idle... only time you will know what hit you is when you hear my Turbo Spool then dump between gears!!!
07-20-2005, 03:04 AM
#10
TECH Fanatic
iTrader: (60)
Join Date: Nov 2004
Location: Canada
Posts: 1,707
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 01 B4C
I have all bolt-ons, stock internals and no weight reduction. My mods are
down below with a video to check out. I would say the converter was the best thing that I did to the car. Race weight was 3525. Hope this helps, jt
down below with a video to check out. I would say the converter was the best thing that I did to the car. Race weight was 3525. Hope this helps, jt
07-21-2005, 10:33 PM
#12
11 Second Club
iTrader: (3)
Join Date: Aug 2004
Location: S. Jersey
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Try this link or right click the lick and save as
http://www.supermotors.org/vehicles/....php?id=180095
http://www.supermotors.org/vehicles/....php?id=180095
07-22-2005, 07:53 PM
#14
11 Second Club
Thread Starter
iTrader: (25)
Join Date: Jun 2005
Location: Texarkana, Texas
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Still can't see it. Not even on my laptop. Am I doing something wrong? No matter if I try to open or save to desktop, says it's a file quick time can't understand
07-25-2005, 12:03 AM
#16
11 Second Club
Thread Starter
iTrader: (25)
Join Date: Jun 2005
Location: Texarkana, Texas
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
I don't know what the deal is. I tried to update my quick time, but it said my software was up to date, so I removed it from my computer and downloaded the latest version. I still can't open the video. It says this.
Couldn't open the file "Ls1[1].mov" because it is not a file that Quick Time understands.
I have other quick time .mov files on my computer and i can watch them just fine. WTF?
Couldn't open the file "Ls1[1].mov" because it is not a file that Quick Time understands.
I have other quick time .mov files on my computer and i can watch them just fine. WTF?
07-25-2005, 10:32 AM
#17
Originally Posted by Xtremespeed
I don't know what the deal is. I tried to update my quick time, but it said my software was up to date, so I removed it from my computer and downloaded the latest version. I still can't open the video. It says this.
Couldn't open the file "Ls1[1].mov" because it is not a file that Quick Time understands.
I have other quick time .mov files on my computer and i can watch them just fine. WTF?
Couldn't open the file "Ls1[1].mov" because it is not a file that Quick Time understands.
I have other quick time .mov files on my computer and i can watch them just fine. WTF?
07-25-2005, 10:57 PM
#19
11 Second Club
Thread Starter
iTrader: (25)
Join Date: Jun 2005
Location: Texarkana, Texas
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Figured it out kinda. My firewall was doing something to prevent it from downloading. It would go through the process, but the file would contain no data. That's why quick time didn't understand it. I disabled my firewall for a few seconds, and it downloaded fine. Weird!
Now back to the subject. Thats a cool video 01 B4C. Love the way your car launches! Now I have to figure out what it's going to take to get mine where you are.
Now back to the subject. Thats a cool video 01 B4C. Love the way your car launches! Now I have to figure out what it's going to take to get mine where you are.
