99-02 fbody pcm pinout vs 99-02 truck pinout
#1
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2007
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
99-02 fbody pcm pinout vs 99-02 truck pinout
Im doing a swap and got a computer with my engine (5.3) but its going in a 99 camaro using its harness, I do NOT have the 5.7 pcm as the car started life as a v6 car. Can I just use the 5.3 pcm no problems or are the pinouts different? (fingers crossed)
Trending Topics
#10
Teching In
iTrader: (2)
Join Date: Jul 2008
Location: Alberta Canada
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
can some let me know what pinouts control the fans, im having a problem with the efans the ecm is not turning them on period, im using a pcm from a 2002 sierra 5.3, any help is appreciated thanks
#11
The Sierra did not use E-Fans, so you would need to turn that on in the calibration. Also you will only have control of one fan with the computer, as the second fans pinout is used by the HVAC. You will need to route to the A/C wire, do a search on Performancetrucks.net to find the pinout and/or A/C wire needed to tap into.
#12
TECH Addict
iTrader: (4)
The Sierra did not use E-Fans, so you would need to turn that on in the calibration. Also you will only have control of one fan with the computer, as the second fans pinout is used by the HVAC. You will need to route to the A/C wire, do a search on Performancetrucks.net to find the pinout and/or A/C wire needed to tap into.