lq4,small cam and all bolt ons 400whp?
#1
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Apr 2005
Location: New Berlin Wi
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
lq4,small cam and all bolt ons 400whp?
I have an 05 lq4 that I will be installing with a t56 and 8.8 ford rear with either 355 or 373 gears, in my 94 s10 shortbox. I plan on using 1 3/4" lt headers and dual exhaust, an ls6 intake, cia, underdrive pulley and a small custom cam, (probably by Pat G) could a setup like this make 400whp with good driveability and decent mileage? Or should I look at an L92 head and L76 intake top end?
Any info would be appreciated.
Thanks,
Kory
Any info would be appreciated.
Thanks,
Kory
#2
12 Second Club
iTrader: (4)
Ive got an LQ9, Lingenfelter CNC L92 heads, 1 3/4" LT, FAST 102mm intake, cai, underdrive pulley, small Comp cam (219/235 .607/.621 113+5) in my S-10.
It made I think 407whp, found out later the fuel pump was giving up and going from 58psi to 35psi.. I still havent changed the pump yet
Heads are going to be what make or break your power. Buy the best ones you can afford(see sig), There are very good cathedral and L92 head avaliable
It made I think 407whp, found out later the fuel pump was giving up and going from 58psi to 35psi.. I still havent changed the pump yet
Heads are going to be what make or break your power. Buy the best ones you can afford(see sig), There are very good cathedral and L92 head avaliable
#3
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Apr 2005
Location: New Berlin Wi
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
I know what you mean about heads, on my camaro I bought Advanced Induction heads and couldn't be happier. I will probably go with the L92 top end. I just wanted to see if I could get where I wanted to be with the stock 317 heads. The truck will be my daily driver, and not see the track much.
Thanks for the input. Are you on s10 forum?
Thanks,
Kory
Thanks for the input. Are you on s10 forum?
Thanks,
Kory
#5
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Apr 2005
Location: New Berlin Wi
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone have an opinion about making 400whp with the stock 317 heads and a small driveable cam? I'm trying to decide if spending the money on an l92 top end is required to meet my goals. Any input would be appreciated.
Thanks,
kory
Thanks,
kory
Trending Topics
#8
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Apr 2005
Location: New Berlin Wi
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
I figure that it will take around 400whp to trap 117. I don't absolutely have to have it. If I could make say 380whp with the 317 heads and a small custom cam I would probably be fine with that.
Kory
Kory