dyno n20 tunning need some suggestions and hp input
#1
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2011
Location: miami,fl
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
dyno n20 tunning need some suggestions and hp input
hey guys i have 99 ta mods on sig i have the edelbrock already on and i am going to hit it with a 150, its going to be a speed density tune. now the tuner told me to get one step leaner and one step richer for the fuel side for tuning. what jets would i have to get. what can i expect out of the car hp wise i don't know if its going to be a mustang dyno or a dyno jet im basically full bolt on's and some extras like the th350 and suspension.
#2
Launching!
iTrader: (6)
Join Date: Mar 2009
Location: cape coral, fl
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
did your tuner aso tell you to get some colder plugs? my guess is if you are going by a companys chart it will take a little more than 1 step leaner on the fuel side to get the tune cleaned up.
#3
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2011
Location: miami,fl
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
yea he told me tr6's gaped at .30. that's what i have cuz i was already hitting it with 100 tr6's gaped .35 untuned and stock intake. now i will be tuned and tr6's gaped .30 new intake and 150 hit.
Trending Topics
#8
Launching!
iTrader: (4)
Join Date: Feb 2011
Location: New York Queens
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
I'm sure all these are going to tell you br7efs. I know plenty of people may tell you tr6's are fine beca but from what I've learned so far is you should really be using a BR style plug not TR. .... Correct me if I'm wrong
#9
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2011
Location: miami,fl
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
where can i get the br7's. iv tried looking at advanced auto parts but no luck. i was going to drop them in but couldn't find them. i bought two sets of tr6's just in case..
#10
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2011
Location: miami,fl
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
i cant correct if i don't know lol. i did what my tuner told me simply because iv seen the cars hes tuned and there flying. i was going to get the br's but cant find them so that's why i went tr6. now he told me this morning to get two jets leaner and richer than suggested but i don't know how far. i asked him and he told me one step leaner and one step richer left me dumb.
#11
TECH Apprentice
iTrader: (16)
Join Date: Jun 2009
Location: Miami, FL
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
hey man whats going on? nitrous outlet sell them, as well as speed inc, ws6store might have them as well. and if i were you ill check with murray's they probably have them and are local.
#12
Launching!
iTrader: (4)
Join Date: Feb 2011
Location: New York Queens
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Go to napa if there is one around. Search the web. Lucky me there is a Napa around the block from my garage I paid $1.80 per plug I bought 40 only catch is it took a day or 2. I called up the local speed shop prior to that it was 2.99 a plug, and if I bought 50-60 he was gonna do 2.50 per. Shop around look for a napa though. BTW stock# is 3346
#13
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2011
Location: miami,fl
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
javier1730 hey bro i didn't really want to order them murray's taxes for everything man there prices are higher then the rest...
Pete91 i have a couple napa's around here 15 min away thanks for the stock num imma see how it go with the tr6's and see how they do if anything then go with the br's ...
Pete91 i have a couple napa's around here 15 min away thanks for the stock num imma see how it go with the tr6's and see how they do if anything then go with the br's ...
#17
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2011
Location: miami,fl
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
i didn't have a nitrous issue. when i put everything back together the car was tripping cuz i had 3 leaking injectors. im guessing that was my problem at the track couple months ago. plus i think the motor was also starving for air with the ls1 intake .
#19
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2011
Location: miami,fl
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
no offense or anything. but i went threw 4 different tuners with my brothers car and this guy was the only guy around here that got the car to idle run and shift properly.
thanks for the advice on the intake at the end of the day that was what i needed the car was sideways till the 60ft shooting off the hole running 9 psi on the nittos
thanks for the advice on the intake at the end of the day that was what i needed the car was sideways till the 60ft shooting off the hole running 9 psi on the nittos