Can you rebuild a lt1 water pump?
#1
Can you rebuild a lt1 water pump?
do you just need a water pump drive seal
and a water pump bearing seal? the back part with the thing that slides over the gear you can move it slighlty and i heard its time for a new one, but can i just buy the bushings and rebuidl mine? and if so how do you pull the bushing and install new ones, how do you rebuild it?
and a water pump bearing seal? the back part with the thing that slides over the gear you can move it slighlty and i heard its time for a new one, but can i just buy the bushings and rebuidl mine? and if so how do you pull the bushing and install new ones, how do you rebuild it?
#7
makes since thats what i was thinking, wounder what all comes with the bearing seal ? iv heard that these can be rebuilt, i just havent found any info other then places claming they have been rebuilt,
Trending Topics
#11
Originally Posted by 96capricemgr
If you find the bearing and seal PN post them up.
That said Advance Auto has remanufactured ones for $41 so don't spend too much on the parts. The impeller I would reuse if it looks good.
That said Advance Auto has remanufactured ones for $41 so don't spend too much on the parts. The impeller I would reuse if it looks good.
#12
TECH Fanatic
iTrader: (10)
Join Date: May 2005
Location: Charlotte, NC
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
http://cgi.ebay.com/ebaymotors/corve...QQcmdZViewItem
that guy has rebuilt a water pump for a friend of mine and is going to rebuild mine, my friend coated his housing in ceramic and im doing the same and the only way to is to take everything apart and getting them rebuilt. I dont know what all is involved but we take our pump apart, coat the housing and send everything to him and about $60 later they are rebuilt. Only way to powdercoat your water pump.
that guy has rebuilt a water pump for a friend of mine and is going to rebuild mine, my friend coated his housing in ceramic and im doing the same and the only way to is to take everything apart and getting them rebuilt. I dont know what all is involved but we take our pump apart, coat the housing and send everything to him and about $60 later they are rebuilt. Only way to powdercoat your water pump.