Thule

got those new blinkers, white, i am realy pleased with them,

the headligth is not installed, it shows n the pic,


old vs new


i also installed a coil relocation kit, it was some trouble with the driver side, because i have a filet cone there, is it okey to have no breahter on the ither sde?





driver side under construction


the plan was to lay the wires behind the motor, but this will be better when i am still working on the car, its looks okey though i.m.o
the crappy phone camera makes it all lokks more dyrti then it realy is



installed, i had the left coilpack more to the left side, to make more space for the filter/ fillercap


tomorrows to-do


sold my gunmetal 18" z06's, and got those Zr1 wheels, the are a little damaged, but the plan is to fix them and powdercode 040black,
my new suspension is still in the box, the sooner i finish the motorwork, i will install sfc's tubular control arms, spohn swaybars, bilsteins/vogtland 1.2"drop

SS02

Looks good bud

hlaalu

iTrader: (3)

looks nice. i just ordered a line lock as well, where are you going to mount the switch?

Thule

thanks, i was thinking about using a switch that is on the dash, but i am not sure, i also have a extra button on the armor board(ashtray mounted)

BlkBird2000

iTrader: (10)

Looks good. Good luck on the rest of the build.

FamousZ

iTrader: (4)

Looks good! The only thing that I don't like is how you can see the spark plug wires.. My thought for the coil relocation kit is to hide all that stuff so it cleans the engine bay up..

hlaalu

iTrader: (3)

yea i want to mount mine in the ashtray, i think that is a good idea so people can't mess with it

Thule

it says in the thread that the wires will not be like this, i putted them like because they are easyer to mess with while i am still working on the car

i am goin to lay them behind the motor, that will look much better

Thule

update

the left pack is in, finaly, and the filter is still there, the coilpack is very not straigth because of the filter, but this is the only way to run both
also layed the wires behind the coilpack, and fastened the coil-loom



and finished left side



here you can see the filter

Thule

more updates

installed slp line lock kit


here is the switch,


my suspension finaly arrived!
vogtland 1.2" drop


bilstein's


gearbox mount..


spohn swaybars


links


UMI sfc's, relocation brackets, tubular control arms


and here is my new ECU, mapped by texaspeed, the car seems to be a little rich, but idles nice, and seems to be ok,


here is a vid, dont mynd the smoke, those where taken in -10°

hope you enjoy