Seat Foam
02-26-2009, 03:22 PM
#2
You'd have to take the seat apart and remove the leather. Its really not too hard, just a bit time consuming.
A quick fix that I've seen some people do is to just lay a few plexi glass stripes across the metal bars. This way the foam doesn't sink.
A quick fix that I've seen some people do is to just lay a few plexi glass stripes across the metal bars. This way the foam doesn't sink.
02-26-2009, 03:37 PM
#3
Copy & Paste Moderator
Yes the foam is interchangeable. As for covering the wires, I didn't want a solid solution because I wanted to maintain flex. Instead of plexi, I used wire screen mesh and wrapped that and the wires with aluminum tape. So now the wires and mesh are one big flexible plate.
02-26-2009, 05:27 PM
#7
Copy & Paste Moderator
