cleaned her up and finally got some good pics
04-12-2009, 03:39 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: May 2006
Location: Elmhurst, IL
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
cleaned her up and finally got some good pics Me and my friend FASTPACE went out to snap some pics of her yesterday
and for the mod's list
FLP Long Tube Headers
Corsa Catback Exhaust System
BMR Strut Tower Brace
UMI Adjustable Pan Hard Bar
Eibach LT1 Pro-Kit Lowering Springs
Koni Sport Adjustable Shocks
BMR Adjustable Lower Control Arms (Rear)
K&N Cold Air Intake
LS6 intake manifold
Thunder Racing Custom Camshaft (230/232 .595 Lift on 114 LSA)
T/A Girdle (Rear End Brace)
Richmond 4.10 Gears (Rear End)
Cartek Stage III clutch
B&M Ripper Short Shifter
Line Lock
Comp 918s Valve Springs
Titanium Retainers
Hardened Pushrods
NGK TR55 Spark Plugs
ASP Underdrive Pulley
Kenny Brown Double Diamond Subframe Connectors
160 Degree Thermostat
18" HP Evo Wheels
Super Hawk Hood Functional Ram Air Hood with Functional Heat Extractors
Silve Face Gauges
Custom Embroidered Firebird Headrests
Alpine CDA-9853 (was factory Monsoon)
Two JL Audio 12W1v2 Subwoofers
Pioneer 760W amp bridged
1.5 Farad Capacitor
and for the mod's list
FLP Long Tube Headers
Corsa Catback Exhaust System
BMR Strut Tower Brace
UMI Adjustable Pan Hard Bar
Eibach LT1 Pro-Kit Lowering Springs
Koni Sport Adjustable Shocks
BMR Adjustable Lower Control Arms (Rear)
K&N Cold Air Intake
LS6 intake manifold
Thunder Racing Custom Camshaft (230/232 .595 Lift on 114 LSA)
T/A Girdle (Rear End Brace)
Richmond 4.10 Gears (Rear End)
Cartek Stage III clutch
B&M Ripper Short Shifter
Line Lock
Comp 918s Valve Springs
Titanium Retainers
Hardened Pushrods
NGK TR55 Spark Plugs
ASP Underdrive Pulley
Kenny Brown Double Diamond Subframe Connectors
160 Degree Thermostat
18" HP Evo Wheels
Super Hawk Hood Functional Ram Air Hood with Functional Heat Extractors
Silve Face Gauges
Custom Embroidered Firebird Headrests
Alpine CDA-9853 (was factory Monsoon)
Two JL Audio 12W1v2 Subwoofers
Pioneer 760W amp bridged
1.5 Farad Capacitor
04-12-2009, 04:23 PM
#5
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: May 2006
Location: Elmhurst, IL
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
Not yesterday.
we were working on a small timetable because it was really sunny (not good for shooting) so we only were able to take shots from certain angles and had to time it right at dusk but get shots before the sun totally went down (which is why we only got one good shots at the last location). That last location is where we were trying for some head on and *** shots
I am sure we will be getting more pictures soon on a day better for shooting.
Also have to adjust one of my exhaust tips as it is misaligned a little bit.
we were working on a small timetable because it was really sunny (not good for shooting) so we only were able to take shots from certain angles and had to time it right at dusk but get shots before the sun totally went down (which is why we only got one good shots at the last location). That last location is where we were trying for some head on and *** shots
I am sure we will be getting more pictures soon on a day better for shooting.
Also have to adjust one of my exhaust tips as it is misaligned a little bit.
Trending Topics
04-13-2009, 11:28 AM
#9
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: May 2006
Location: Elmhurst, IL
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
i had the same setup in my old car, its nothing super special.
We didn't get any really nice pics of it this time, it wasn't a priority and the hatch was creating a nasty shadow when we tried to so we just said forget it
this is what it looked like in my old car though
Ignore the neon, that was there for less than a day. That is the sub box though, I custom built it out of 3/4" MDF
here is another shot with the much older subs they sounded fine in the trunk of my old bonneville, but like *** under the hatch. If you build a box for one of these cars don't skimp on the quality of sub you put in it because it won't sound good.
We didn't get any really nice pics of it this time, it wasn't a priority and the hatch was creating a nasty shadow when we tried to so we just said forget it
this is what it looked like in my old car though
Ignore the neon, that was there for less than a day. That is the sub box though, I custom built it out of 3/4" MDF
here is another shot with the much older subs they sounded fine in the trunk of my old bonneville, but like *** under the hatch. If you build a box for one of these cars don't skimp on the quality of sub you put in it because it won't sound good.
