LeftySS

iTrader: (17)

Just thought I would post some of my fall/winter projects. Just want to see what you guys think. Some of the pics were taken with my iphone, so the quality might not be so great on some.

1. While I was rebuilding the front end thought I would repaint & powder the brake calipers and brackets (Front & Back).
Before

After






2. Also decided I want to go back to an all polished wheel. So ordered some blingmaster and went to work. Before picture (Above)







Now we move under the hood. Powdered valve covers and coil brackets. Painted coils and Intake. Wire Mod. Filled & repainted shock tower. Rerouted PCV. AC delete. Please excuse the unfinished engine bay. Waiting to get my P/P & Powdered TB and Pwdr fuel rail back from Silverghost. Will Post Pics when it is all put back together.

Before


During






After






I know these are a performance mod, but they look so good just had to post um up.


Currently working on Polishing my N20 solenoids and N20 line fittings. Hopefully they will turn out ok. They should look better than the scuffed up look anyhow. Thanks for looking. Opinions and advice welcomed.

uphigh07

iTrader: (48)

that looks nice man keep the pictures coming

homerunhtr21

iTrader: (18)

Hit enter after each picture so the thread isnt huge.

PhillyLS1

iTrader: (3)

Latest detail pics:






[/QUOTE]

00blueLS1

thats alot of time VERY well spent looks great

Trans Am Jam

iTrader: (7)

wowwww looks awesome man. time well spent... what'd you paint your engine bay w/ .. paint matched rattle can? or a paint gun?

LeftySS

iTrader: (17)

Sorry about the pics guys. Didn't realize it would do that. Fixed it for ya.
Paint is just rattle can Duplicolor Wheel Paint. Have always seemed to have good luck with it and it seems very durable and matchs pretty well. Suppose to hold up to some decent temps so we'll see how it does on the intake. That doesn't get to hot so I think it should be ok.

98NBM1

iTrader: (4)

nice job

3800RS

iTrader: (15)

nice work

mattl31

iTrader: (8)

what headers and X pipe are those? looks great man

223HAWK

iTrader: (11)

Awsome engine bay..looks a lot better..as does the wheels and EVERYTHING..


if I could just get off my butt and go do it..

badbird5.7

iTrader: (11)

did you just use a spray can to do your intake and coils?

98Greenz28

iTrader: (12)

Wow looks great, keep us posted.

I like your custom painted lid too, what kind of paint was used on that?

98Greenz28

iTrader: (12)

Ok I looked at it again and it looks like a sticker?

HoLLo

iTrader: (17)

Great looking engine bay!!

sworaz

iTrader: (13)

Looks great. What kind of a detail process do you do on your exterior paint?

LeftySS

iTrader: (17)

Yeah it is just a sticker.

Shockwave179

iTrader: (7)

Nice, I like your Forgelines. I think they would look better without the center cap though.

LeftySS

iTrader: (17)

You know I thought about that myself. I might have to try and see if I can polish out the center and see what it will look like with chrome lug nuts. Or are you talking about leaving the plate on and leave the hole in the center?

You might have given me my next project.

LeftySS

iTrader: (17)

Yeah just used the Duplicolor wheel paint and the clear. Have had good luck with it so far. We'll see how it holds up on the intake.