Clear markers look pink
#4
Good question. I'd like to see if there's a resolution too. The rear clears didn't disperse the light well and were kinda dim, so I left the stock ones on and only used clears for the front side markers.
Trending Topics
#10
#13
TECH Addict
iTrader: (162)
I have some like this in our white TA:
http://cgi.ebay.com/ebaymotors/2-x-T...Q5fAccessories
The wheels on the orange car are 19in CCW 505As.
#15
TECH Veteran
iTrader: (7)
Join Date: Jun 2006
Location: Bay Area California
Posts: 4,409
Likes: 0
Received 0 Likes
on
0 Posts
SMDs they are definitely more red than filament bulbs.
I have these in my rear side markers and tail lamps...
http://cgi.ebay.com/ebaymotors/2X-5-...Q5fAccessories
I have these in my rear side markers and tail lamps...
http://cgi.ebay.com/ebaymotors/2X-5-...Q5fAccessories
Last edited by Ls1CamaroGuy87; 05-13-2010 at 12:35 AM.
#16
TECH Fanatic
iTrader: (1)
If it's for the taillight markers, should be a direct plug' n play for LEDs. Just get the right bulb number.
I know the lights are not on in pic, but if this is the light ur talking about, no modification of wiring is necessary. Just swap in an LED on each side. When my lights are on, the red shows right through the VHT nicely.
I know the lights are not on in pic, but if this is the light ur talking about, no modification of wiring is necessary. Just swap in an LED on each side. When my lights are on, the red shows right through the VHT nicely.